The conditions of software for Mac OS X 10.9 (Mavericks)

Supported OS

* The following operating conditions are the results obtained by internal tests.
   Note that other problems may be occurred.
* The following operating conditions were tested with SMB connection.
   It is not possible to connect to the computer with AppleTalk because Mac OS X 10.9 does not
   support AppleTalk.
* The software other than listed in the following table does not support Mac OS X 10.9.

  • Yes -> Functions normally.
  • Yes* -> Operable, but partially has problems.
  • No -> Cannot be used.
Product name Ver Operation Status Workaround Plan to support
FineCut8 for Illustrator 8.3 Yes It operates normally.
Serial interface operates normally with USB serial adapter (OPT-SS036).
- Completed
RasterLinkTools 1.2 Yes It operates normally. - Completed
When using Mac OS X 10.9 for RasterLink6 client 1.7.2 Yes* [Printer Driver output]
[1] Printer Driver is available to output the data from Mac OS X 10.9 to RasterLink6 installed into Windows 8.1/8/7/Vista.

[2] It cannot be connected to WindowsXP.
[2] Please use Hot folder to output the data when RasterLink 6 is installed into WindowsXP. Not supported on [2]
Yes [Hot folder output]
It operates normally.
- Completed
When using Mac OS X 10.9 for RasterLinkPro5 client 4.20 Yes* [Printer Driver output]
[1] Printer Driver is available to output the data from Mac OS X 10.9 to RasterLinkPro5 installed into Windows 8.1/8/7/Vista.

[2] It cannot be connected to WindowsXP.
[2] Please use Hot folder to output the data when RasterLinkPro5 is installed into WindowsXP. Not supported on [2]
Yes [Hot folder output]
It operates normally.
- Completed
When using Mac OS X 10.9 for RasterLinkPro4 client 1.24 Yes* [Printer Driver output]
[1] Printer Driver is available to output the data from Mac OS X 10.9 to RasterLinkPro4 installed into Windows Vista.

[2] It cannot be connected to WindowsXP.
[2] Please output the data from the Hot folder when RasterLinkPro4 is installed into WindowsXP. Not supported on [2]
Yes [Hot folder output]
It operates normally.
- Completed
When using Mac OS X 10.9 for RasterLink Pro III client 1.22 Yes* [Printer Driver output]
[1] Printer Driver is available to output the data from Mac OS X 10.9 to RasterLinkPro III installed into Windows Vista.

[2] It cannot be connected to Windows 2000/XP.
[2] Please use Hot folder to output the data when RasterLinkPro III is installed into WindowsXP. Not supported on [2]
Yes* [Hot folder output]
[1] Hot folder is available to output the data from Mac OS X 10.9 to RasterLinkPro III installed into Windows XP/Vista.

[2] It cannot be connected to Windows 2000.
- Not supported on [2]

Return to Content

PAGETOP