JV34-260 [End of sale]

Specifications


JV34-260
Head On-demand Piezo head (Array of 2 staggered print heads)
Maximum width 2,632mm(103.6")
Print resolution 540,720,1,440 dpi
Print speed
(4-color mode)
High speed 29.9m²/h (540×720dpi,4pass,bi-directional)
Standard 21.4m²/h (540×1,080dpi,6pass,bi-directional)
High quality 13.2m²/h (540×1,440dpi,8pass,bi-directional)
InkSolvent ink SS21 (C,M,Y,K,Lc,Lm)
Sublimation ink Sb53, Sb54 (Bl,M,Y,K,Lbl,Lm)
Ink supply system
(4-color mode)
440 ml ink cartridge: 2 x per color (880 ml ink/color)
MBIS (2 l ink container): 2 x per color (4 l ink/color) *1
Ink supply system
(6-color mode)
440 ml ink cartridge: 1 x per color (440 ml ink/color)
MBIS (2 l ink container): 1 x per color (2 l ink/color) *1
MediaSize 210mm~2,642mm (8.2"~104.0")
210mm~1,620mm (8.2"~63.9")
(narrow take-up device)
Weight 100kg (220 lbs.)
25kg (55 lbs.)
(narrow take-up device)
Roll diameter φ250mm (9.8")
φ180mm (7.0")
(narrow take-up device)
Inside roll diameter 3 inch 2-3 inch
(narrow take-up device)
Print aspect Inside/outside
Media cutter Y-direction cutter after head section
Media heater 3 stage intelligent heater (pre/print/after)
Media dryer Post-heating and automatic drying fan
Interface USB2.0
Applicable standard VCCI class A,FCC class A IEC60950,
CE Marking (EMC pass,voltage and machine),CB Report
Power specification AC100~120V±10%,AC220~240V±10%,50/60Hz±1Hz
Power consumption 2 x less than 1,440W
Operational environment Temperature: 20°C-35°C (64-95 °F);
Humidity: 35-65 % RH (non condensing)
Dimensions (w)x(D)x(H), weight 3,650 × 1,302 × 1,424 mm (143.7" × 51.3" × 56.1")
/465kg (1,025 lbs.)

*1 Optional Mimaki bulk ink system 2 (MBIS2) is required for using 2L Ink pack.


Ink set

SS21
[C,M,Y,K,Lc,Lm]
C M Y K
C M Y K Lc Lm
Sb53
[Bl,M,Y,K,Lbl,Lm]
Bl M Y K
Bl M Y K Lbl Lm
Sb54
[Bl,M,Y,K,Lbl,Lm]
Bl M Y K
Bl M Y K Lbl Lm

  • Some of the samples in this website are artificial renderings.
  • Specifications, design and dimensions stated in this website may be subject to change without notice (for technical improvements, etc).
  • The corporate names and merchandise names written on this website are the trademark or registered trademark of the respective corporations.
  • Inkjet printers print using extremely fine dots, so colors may vary slightly after replacement of the print heads. Also note that if using multiple printer units, colors could vary slightly from one unit to the other due to slight individual differences.


JV34-260 Catalog (689.33KB)

Model

JV34-260 Maximum print width: 2,632 mm (103.6")

Related products

Return to Content

PAGETOP