The conditions of software for Windows 11

Supported OS/SW

* The following operating conditions are the results obtained by internal tests.
 Note that other problems may be occurred.
* The software other than those below does not support Windows 11.
  • Yes -> Functions normally.
  • Yes* -> Operable, but partially has problems.
  • No -> Cannot be used.
Product name Ver Status Workaround Plan to support
Mimaki Driver
-

Operation is currently under investigation.
Do not use Windows 11 until the investigation is completed.
January, 2022
Simple Cut
-

Operation is currently under investigation.
Do not use Windows 11 until the investigation is completed.
TBD
FineCut/Coat9 for Illustrator
-

Operation is currently under investigation.
Do not use Windows 11 until the investigation is completed.
December, 2021
FineCut/Coat9 for CorelDRAW
-

Operation is currently under investigation.
Do not use Windows 11 until the investigation is completed.
December, 2021
RasterLinkTools for Illustrator
-

Operation is currently under investigation.
Do not use Windows 11 until the investigation is completed.
December, 2021
RasterLinkTools for CorelDRAW
-

Operation is currently under investigation.
Do not use Windows 11 until the investigation is completed.
December, 2021
Simple POP
-

Operation is currently under investigation.
Do not use Windows 11 until the investigation is completed.
TBD
RasterLink7
-

Operation is currently under investigation.
Do not use Windows 11 until the investigation is completed.
April, 2022
RasterLink6Plus
-

Operation is currently under investigation.
Do not use Windows 11 until the investigation is completed.
January, 2022
RasterLinkPro5
-

Operation is currently under investigation.
Do not use Windows 11 until the investigation is completed.
January, 2022
When using Windows 11 for RasterLink7 client
-

Operation is currently under investigation.
Do not use Windows 11 until the investigation is completed.
April, 2022
When using Windows 11 for RasterLink6Plus client
-

Operation is currently under investigation.
Do not use Windows 11 until the investigation is completed.
January, 2022
When using Windows 11 for RasterLinkPro5 client
-

Operation is currently under investigation.
Do not use Windows 11 until the investigation is completed.
January, 2022
TxLink4
-

Operation is currently under investigation.
Do not use Windows 11 until the investigation is completed.
January, 2022
Printer Driver
-

Operation is currently under investigation.
Do not use Windows 11 until the investigation is completed.
TBD
MigrationTool
-

Operation is currently under investigation.
Do not use Windows 11 until the investigation is completed.
April, 2022
CalibrationTool
-

Operation is currently under investigation.
Do not use Windows 11 until the investigation is completed.
April, 2022
SimpleStudio
-

Operation is currently under investigation.
Do not use Windows 11 until the investigation is completed.
TBD
ArtiosCAD
-

Operation is currently under investigation.
Do not use Windows 11 until the investigation is completed.
TBD
Mimaki 3D Link
-

Operation is currently under investigation.
Do not use Windows 11 until the investigation is completed.
TBD
Mimaki Profile Master3
-

Operation is currently under investigation.
Do not use Windows 11 until the investigation is completed.
January, 2022
JigLink
-

Operation is currently under investigation.
Do not use Windows 11 until the investigation is completed.
TBD
CuttingLink
-

Operation is currently under investigation.
Do not use Windows 11 until the investigation is completed.
TBD
Mimaki Profile MasterⅡ
-

-
-

Not supported
Mimaki Target Color Emulator
-

-
-

Not supported
FineCut8 for Illustrator
-

-
-

Not supported
FineCut8 for CorelDRAW
-

-
-

Not supported
RasterLinkPro4
-

-
-

Not supported
RasterLinkProⅢ
-

-
-

Not supported
When using Windows 11 for RasterLinkPro4 client
-

-
-

Not supported
When using Windows 11 for RasterLinkProIII client
-

-
-

Not supported
TxLink3
-

-
-

Not supported

Return to Content

PAGETOP