1. Selecting the Cutting Movement Direction [ROTATION]

Setting Rotation

  1. Press the [FUNCTION] key in local mode.
  1. Use updown jog_ to select [SET UP], then press the [ENTER/HOLD] key.
  1. Use updown jog_ to select [ROTATION], then press the [ENTER/HOLD] key.
  1. Use updown jog_ to select [ON] or [OFF], then press the [ENTER/HOLD] key.
  • ON: The coordinate axes are rotated and the origin is moved at the same time.
  • OFF: No rotation is performed.
  1. Press the [END] key several times to exit.

Note about coordinate systems

This machine uses the following four coordinate systems, in accordance with the combination of sheet loading direction and rotation function:

Coordinate axis rotation figure 2