2. Options
3. Sheet Tables and Cutting Sheet
4. Loading a Sheet on the Cutting Sheet

1. Sheet Tables and Cutting Sheet

Loading a Sheet on the Cutting Sheet

1. Remove the cutting sheet sandwiched between the reinforcing card from its bag.

• Retain the reinforcing card and bag, as these will be used when storing the cutting sheet.

2. Peel off the separator (adhesive surface protector) from the cutting sheet.

• Take care not to touch the adhesive surface.
• Retain the separator, as this will be used when storing the cutting sheet.

3. Affix the sheet to the adhesive surface of the cutting sheet.

• The size of the adhesive surface corresponds to the available cutting area. Affix the sheet so that it is within the available cutting area.

• When affixing thin sheets, take care to ensure that the sheet does not wrinkle.
• Coated card must be affixed with the non-coated side against the adhesive surface. The card may become detached if the coated side is affixed or both sides of the card are coated.