Installing the Cutter in the Cutter Holder
Be careful to keep the cutter from falling into a gap in this machine. We recommend replacing the cutter over the sheet to enable the cutter blade to be picked up easily if it falls.
![](https://d2w577gk9zpoty.cloudfront.net/themes/manual@mimaki/cg-ar-series/operation_manual/en-US/../safety/Warning_Sharp_Warning_Sharp.png)
- Avoid touching the cutter blade. Failure to do so may result in injury.
- Do not shake or swing the cutter holder. Doing so may cause the blade to come off.
![](https://d2w577gk9zpoty.cloudfront.net/themes/manual@mimaki/cg-ar-series/operation_manual/en-US/../safety/Prohibition_NoChildren_Prohibition_NoChildren.png)
- Avoid storing this product in locations accessible to children.
![](https://d2w577gk9zpoty.cloudfront.net/themes/manual@mimaki/cg-ar-series/operation_manual/en-US/../safety/Action_Action.png)
- When disposing of cutters, contact an industrial waste disposal operator or dispose in accordance with the local laws and regulations.
- Insert the cutter into the cutter holder using tweezers.
- Check the orientation of the cutter before inserting it fully.
![](https://d2w577gk9zpoty.cloudfront.net/themes/manual@mimaki/cg-ar-series/operation_manual/en-US/../assets/img/safety-symbols/Hint.png)
- For information on blade replacement, refer to Cutter Replacement.