2. Cutting
3. Installing Tools
4. Using the Cutter
5. Installing the (Supply) Cutter in the Cutter Holder (SPA-0001)
6. Adjusting the Cutting Blade Protrusion Length

1. Installing the (Supply) Cutter in the Cutter Holder (SPA-0001)

Adjusting the Cutting Blade Protrusion Length

1. Loosen the lock nut of the cutter holder.

2. Turn the adjusting knob to adjust the protrusion of the cutting blade.

3. Fix the lock nut by turning in the direction indicated by the arrow in the picture.