RasterLink7 installation PC
Operating System
- If our company's software does not operate correctly in the operating environment listed,it may be due to the version of OS/browser, etc.
If you are using an older version of OS/browser, etc.,we recommend updating your environment to the latest version to use.
OS*1 | Microsoft® Windows 10® Home (64-bit version) Microsoft® Windows 11® Home |
- Windows 10: Version 1909 or later
Recommended system
OS | Windows® 11 Pro 64bit |
CPU | Intel® Core™ i5 -10500 (3.0 Ghz) or higher |
Memory | 8 GB |
Disk space | Free space of 1 TB or more (NTFS format) |
Interface | Ethernet port*2, USB1.1/2.0*3 |
- Use an Intel CPU and an Intel chip set. Otherwise, an error may occur during printing, causing the printer to stop printing.
- It is required for license activation. (It is still required even if the system has no Internet access or a PPP-connected network device is used.)
(For Ethernet-connection-enabled printers only) An Ethernet port is required to connect the printer. Use a PC that supports 1000BASE-T (Gigabit). For details, refer to the Important section below. - A USB2.0 port is required to connect to a printer. Do not use a USB hub and an extension cable when connecting to the printer. An error may occur during printing, causing the printer to stop printing.
To print over the network, you need to have the environment below. Stable communication may not be possible if the specifications are lower than the following:
- PC: The LAN port supports the 1000BASE-T (gigabit) mode.
- Cable: It is the CAT6 or higher cable.
- Hub (if used): It supports the 1000BASE-T (gigabit) connection.
- For the latest information, visit our official website (https://mimaki.com/).
Limitations on printing via network
- The system is not available over a wireless LAN or on a PLC.
- The system is not available on a VPN.
- When used with a wireless LAN, the system may not be able to connect to a printer. In this case, disable the wireless LAN.
- The RasterLinkPC is available only when it is on the same segment as the printer.
- If the network experiences high load during data transfer to the printer (for example, downloading a video at the same time), the sufficient transfer rate may not be achieved.
