Special Conditions
Base clear, Base primer, High-speed primer
Printing color layers directly on some media may cause dot bleeding, resulting in blurred thin lines and small characters.
In such cases, printing a primer or clear layer underneath the color layer enables sharp, non-bleeding characters and thin lines.
Base primer/High-speed primer also has the effect of a primer, and High-speed primer enables output in a shorter time.
- High-speed primer is supported only on UJF-7151plusIIe.
LD1, LD2, LD3 (LD = Long Distance Mode)
It can be used with media that has a distance from the print head to the print surface.
- The distance from the print head to the print surface includes the print head gap.
Distance from the print head to the printing surface
- For 4.0mm or less: LD1
- For 6.0mm or less: LD2
- For 10.0mm or less: LD3
- The amount of ink mist tends to occur more frequently compared to the normal mode. When the gap widens, ink droplets fail to reach the media and become misted.
- Please perform cleaning after printing and regularly clean the nozzle area.
- When using LD Mode, color tones may change or image quality may be reduced.
