About Media Name Types of v3 Profile

For v3 Profile, different types of device profiles are available depending on the concept differences and versions.

The types are divided by the symbol at the end of media name.

v3.x Profile

Device profiles have versions, which are appended to the end of the media name as "v3.x".

Unless "v3.x" is appended at the end, all profiles are v3.3 or later.

RasterLink Version Compatibility for v3 Profiles

RasterLink5
It is compatible with v3 and v3.1, but not with v3.2 or later.
RasterLink 6 or later
Compatible with all v3 versions.

Recommended values for RasterLink's color matching function

Recommended values for RasterLink's [color matching ] function will vary

v3 - v3.4 Profile
This profile recommends "Default".
Profile v3.5 or later
This profile recommends "Mimaki_Expand_Color" or "Deep_Color_Natural".

"D" to "LD"

File name suffix	Explanation
"_D"	The profiles are designed to raise the overall density based on the concept of emphasizing density. ex.) GPVC[441]_D v3
"-S" or "_s"	The profiles are designed to reduce the density based on the concept of ink consumption reduction. ex.) Mimaki GPVC[SPC706] -S
"Quality"	The profiles are designed to fill the dots in gaps to reduce grainness based on the concept of image quality improvement. ex.) Mimaki GPVC[SPC706] Quality
"sp"	The profiles are designed to fill the dots in gaps to reduce grainness based on the concept of image quality improvement. Use more Small dots and realize a smooth expression in photographic images. ex.) Mimaki GPVC[SPC706] v3.5sp
"br"	The profiles are designed based on the concept of banding reduction. Use more Large dots to reduce banding (Bi direction banding, streak banding etc.) The profiles are suitbal for the data with many solid images. ex.) Mimaki GPVC[SPC706] v3.5br
"nr"	The Profiles are designed to reduce noise such as black spots. ex.) Generic Transfer Paper_nr
"White", "WonC", "ConW"	The Profiles for using white ink. Printing methods change according to the following notation.
	(White on Color), (WonC) The optimized profile for printing in order from Color to White. ex.) SABIC LEXAN8010Film(White on Color) ex.) Mimaki BckTLX[MSL140](WonC)
	(Color on White), (ConW) The optimized profile for printing in order from White to Color. ex.) SABIC LEXAN8010Film(Color on White) ex.) Mimaki BckTLX[MSL140](WonC)
	(withWhite) The optimized profile for using white ink environment irrespective of printing order. ex.) Mitsubishi AcryliteEX001(withWhite)
"LD"	(In front of media name) The optimized profile for the environment when using LD mode. ex.) LD1 UV-PET v3.5 About the explanation of LD mode, please refer to the instruction manual.

"G" to "ff"

File name suffix	Explanation
"G"	The profiles with gray balance adjustment. The profiles are optimized for "Gray Balance" mode in "Color Matching" of RasterLink. There are several versions for "G" profiles.
	v3G The profiles which are adjusted to optimize "Gray Balance" mode in "Color Matching" of RasterLink. ex.) JC4k-Tropical v3G
	v3G-1 The profiles which are adjusted blueness lower than "v3G". ex.) JC4k-Tropical v3G-1
	v3GDK The optimized profiles for using DeepBlack ink. ex.) JC4k-Tropical v3GDK
	v3GBL The optimized profiles for using Bule ink and LightBule ink (Ver.2). ex.) JC2K-Tropical v3GBL
	v3GBB The optimized profiles for using BrilliantBlue ink. ex.) JC4k-Tropical v3GBB
	v3GBB-1 The profiles which are adjusted blueness lower than "v3GBB". ex.) JC4k-Tropical v3GBB-1
	v3GKT The profiles for using transfer paper specific Black ink. ex.) JC4k-Tropical v3GKT
"DK"	The optimized profiles for the environment of using DeepBlack ink. ex.) Coldenhove Jetcol HTR3000 DK
"ff"	This profile emphasizes the expression of fine lines. ex.) Generic Transfer paper_ff

That concludes the descriptions of each profile.

When there is any further information, please see the remarks section for each profile at downloading page.