1. Simple Create Functions

Connecting to a Printer or Plotter

Information for the printers or plotters currently connected is obtained automatically and displayed on the screen.

Allows easy selection of the printer or plotter used for output.

  1. Tap the printer or plotter icon at the upper right of the screen.
Printer/plotter selection screen_
  • The device selection dialog box appears.
  1. To select a printer, select [Printer Type] and [Printer], or to select a plotter, select [Plotter Type] and [Plotter].
Printer Plotter Selection Dialog_
  • The device is connected to a printer or plotter.

For a plotter

If the device selected for [Plotter Type] is present in [Plotter], [Plotter] is automatically selected and connected.

For serial connections to plotters, set the plotter baud rate to 38400.

 

For a printer or plotter

If the same device (printing and cutting machine) is selected for the printer and plotter
  • The [Print & Cut] tab is displayed on the Output setting screen for both printing and cutting. Output setting screen
If an external printer is selected for printing and CG-AR is selected for cutting
  • In this case, the sheet size for cutting is set to the paper size. If necessary, change the sheet size for cutting, or change the printer type to CJV200 or a different model.