1. Output setting screen

Cut condition tab

This tab is used to configure the cutting related settings.

Cut output condition setting screen_

No.

Name

Overview

1

Cut Condition

Specifies the cutting conditions for the media names and actions. Details

2

Auto Cut*1

When this setting is enabled, each sheet is cut off automatically when cutting is complete.

3

Object list*2

Lists the objects for which "Cut" is set for the output type on the Canvas screen.

The cutting order can be altered by tapping and dragging the "=" symbol.

Media names and actions can be specified as output conditions.

  1. You must be signed in to PICT to use the Auto Cut function.

  2. The object list is not displayed when the tab is accessed from the Design placement screen.

Detailed information

[Cut Condition]

The following settings can be configured:

  • [Media]
  • Name used to manage the output settings.
    Any name can be set as required by the user.
  • [Action]
  • Sets the type of output, such as cutting, pen plotting, or creasing.
    The following output conditions can be set:
    • [Speed]
    • [Pressure]
    • [Offset]
  • [Auto Cut]
    • [Max Data Length +]
    • Sets the length from the last row to the cutting position. (Distance A in the figure below)
    • [Detail Cutting]
    • Cuts for each row when enabled. (The blue lines in the figure below)
    • Auto Cut Setting_
  • When printing and cutting is selected, [Detail Cutting] can be selected only when individual register marks are set.
  • When cutting is selected, [Detail Cutting] cannot be selected when overall register marks are set.