FUNCTION

This features settings for various useful functions and operations when using the machine. Press the [FUNCTION] key and execute or set the following items:

Item	Details
Square [SQUARE CUT]	Performs a test cut to confirm that the tool conditions are appropriate. Test Cutting Cuts two squares using test cutting.
DATA CLEAR	Clears the data when data cutting has been aborted. Aborting Cutting (Data Clear)
FEED	Pulls out the sheet before cutting to provide slack. Sheet Feed Feed length: 0.1 to 51.0 m
Multiple sheet cutting [No. COPIES]	Cuts multiple copies of the received data. Cutting Multiple Copies of the Same Data [MULTI COPY] Cut copies: 1 to 999 copies Interval between images cut: 0 to 30 mm
Distance correction [DIST.COMP.]	When cutting long data, discrepancies in the displacement may arise between the sheet left and right sides. This corrects such discrepancies. Length Correction [DIST.COMP.] Standard value: A direction: 500, 1,000, 1,500, 2,000, 2,500 mm B direction (CG-60AR): 200, 400, 600 mm B direction (CG-100AR): 200, 400, 600, 800, 1,000 mm B direction (CG-130AR): 200, 400, 600, 800, 1,000, 1,200 mm Correction value: A direction: ± 5 % of standard length (0.1 mm steps) B direction: ± 5 % of standard length (0.1mm steps) Plotting offset: 0 to 300 mm
Settings [SET UP]	In this menu, you can make various settings on the machine. SET UP
MARK SENSOR	Checks the responsiveness of the register mark sensor when data with register marks was unable to be cut correctly. Checking Register Mark Sensor Responsiveness
SAMPLE CUT	Cuts a sample to troubleshoot problems when data was unable to be cut correctly. Investigating the Cause of Cutting Failures
User selection [USER CHANGE]	Settings (cutting conditions, distance correction, and main unit settings) can be saved individually for each user. (Up to 8) Simply selecting a user number corresponding to the user allows the machine to be used without the need to alter any settings. Changing Users [CHANGE USER]
LIST	This can be used as a record by the customer or for faxing when inquiring about maintenance. Outputting the Settings List [LIST]
ASCII DUMP	Sends data from the host computer, and prints the data as ASCII code. Outputting Received Data as ASCII Code [DUMP]
DISPLAY	Selects the screen display language. Selecting the Screen Display Language [DISPLAY]
Machine information [INFORMATION]	Checks the machine information. Checking Machine Information [INFORMATION]