1. Favorite

Favorite Settings - Functions

RasterLink7 lets you save various settings as favorites. Settings saved (registered) as favorites can be applied to other print data.

The following conditions can be set as favorites for each function.

[Properties]

  • [Job Attribute]
  • [Source color], [Ink]
    Displayed when [Job Attribute] is set to [Mono Color].
  • [UV Mode]
The UV Mode settings can be set as favorites in the case of the following jobs:
  • Jobs for which [Job Attribute] is set to [Full Color] and a CMYK color or spot color has not been replaced with a special color
  • Jobs for which [Job Attribute] is set to [Mono Color]
  • [UV Mode] (Color Replacement)
    UV mode for registering and using with jobs for which a CMYK color or spot color has been replaced with a special color
  • [UV Mode] (Special plate)
    UV mode for registering and using with jobs for which a special plate has been created or special plate jobs created automatically

For more information on how to set and apply, refer to Favorite Settings - Operations.

Settings cannot be saved as favorites. Favorite settings cannot be applied with the following jobs:
  • Jobs for which [Job Attribute] is set to [Cut Only] on the [Properties] screen
  • Jobs for which the original image was in RGB color mode
The following items cannot be saved as favorites:
  • [Properties] when [Attribute] in [Job List] is [Color (Glossy)]

[Print Condition]

All of the conditions that can be set on the [Print Condition] screen

[General Print]

  • [Scale]
  • [Rotation]
  • [Mirror]
  • [Deskew]
  • [Arrange in the Center]
  • [Register Mark]
  • [Add Label]
  • [Cut Edit]

[Jig Print]

  • [Jig Print ON/OFF]
  • [Jig name]
  • [Scale]
  • [Rotation]

[Mirror]

 

[Tiling]

  • [Scale]
  • [Rotation]
  • [Mirror]
  • [Overlap]
  • [Tile number]
  • [Cut line]
  • [Add Label]

 

[Step & Repeat]

  • [Scale]
  • [Rotation]
  • [Mirror]
  • [Arrange in the Center]
  • [Type]
  • [Add Label]
  • [Reference Line]

 

[Jig Print]

  • [Kebab Print ON/OFF]
  • [Scale]
  • [Rotation]
  • [Mirror]

[Special plate]

  • [Special plate]
  • [Special Color Print Area]
  • [Execute]
  • [Automatic Creation]

 

 

[Layer]

  • [Layer setting for Special Color at Color Replace]
  • [Position Correction]

[Special color size correction]

Layer setting for Special Color at Color Replace]
Allows special color overprinting of image data when a special color has been used to replace another color to be registered as a favorite for each special color.
The following four types of special color overprinting can be registered:
  • Special color→ Color
  • Color→ Special color
  • No color overprint
  • Default (One of the above three types is registered as the default in accordance with the RasterLink7 program)

[Execute]

  • [Print Count]