License activation
If you want to use RasterLink6Plus continuously, you need to active your license.
For license activation, the RasterLinkPC has to connect to the Internet.
(If the PC has no Internet access, you can use another PC that has Internet access for activation.)
The license activation process uses the information from Ethernet equipment as hardware configuration information of the PC.
- Do not disable the Ethernet equipment that is enabled upon license activation.
If you switch between wired and wireless connections, keep the equipment that has been used so far active. - If you use a PPP-connected or USB-connected network device, enable Ethernet equipment.
- In license activation, the serial key and the information to identify the RasterLinkPC (which is generated automatically from the PC hardware configuration information) are sent to Mimaki Engineering.
- You can use the software without activating the license for 60 days from the first startup, which is a trial period.
If you do not activate the license during the trial period, you can no longer use RasterLink6Plus after the period ends. - The program update and the profile update are not available before the license is activated.
Version upgrade through the program update
Installation procedure from the profile update
Also, the version upgrade through the update tool, which is provided at the download page of the official website, is not available.
