- The following is the basic system configuration
- Ethernet and USB2.0 cannot be connected at the same time.
- Print & Cut data is transferred from Adobe Illustrator to “RasterLink6Plus or RasterLink7 (*2)”
via “FineCut8 or FineCut/Coat9 (*1)” or “RasterLinkTools (*1)”.
The computer and the printer are connected with USB2.0 cable (*2) or LAN cable (*2).
Note that “Raster Link6 Plus or RasterLink7”, “FineCut8” and “RasterLinkTools” come with the main unit.
“CuttingLink (*1)” is not attached. Please download it from Mimaki website.
(*1):
- “FineCut8”, “FineCut/Coat9” and “RasterLinkTools” are the plug-in software for Adobe Illustrator
and CorelDRAW.
- “CuttingLink” is required for using ID cut function.
(*2):
You need to prepare a PC for installing RIP (RasterLink6Plus or RasterLink7)
and USB2.0 cable (OPT-J0137)or LAN cable to operate UCJV300/150.