* The following operating conditions are the results obtained by internal tests.
　Note that other problems may be occurred.
* The following operating conditions were tested with SMB connection.
　 It is not possible to connect to the computer with AppleTalk because
　 macOS 11 does not support AppleTalk.
* The software other than listed in the following table does not support macOS 11
　

• Yes -> Functions normally.
• Yes* -> Operable, but partially has problems.
• No -> Cannot be used.

Product name	Ver	Operation	Status	Workaround	Plan to support
FineCut9 for Illustrator	1.5	Yes	It operates normally. *1	-	Complete
RasterLinkTools for Illustratorr	1.9.0	Yes	It operates normally.	-	Complete
When using macOS 11 for RasterLink7 client	1.1.0	Yes	[Printer Driver output] It operates normally. Operation is verified under Windows 8.1/ 10	-	Complete
		Yes	[Hot folder output] It operates normally. Operation is verified under Windows 8.1/ 10	-	Complete
When using macOS 11 for RasterLink6Plus client	2.10	Yes	[Printer Driver output] It operates normally. Operation is verified under Windows 8.1/ 10	-	Complete
		Yes	[Hot folder output] It operates normally. Operation is verified under Windows 8.1/ 10	-	Complete
When using macOS 11 for RasterLinkPro5 client	4.80	Yes	[Printer Driver output] It operates normally. Operation is verified under Windows 8.1/ 10	-	Complete
		Yes	[Hot folder output] It operates normally. Operation is verified under Windows 8.1/ 10	-	Complete

*1 Serial connection using a USB serial adapter is not available because the driver is not supported. Use the operating system with macOS 10.15 or earlier when outputting with a serial connection.

---