* The following operating conditions are the results obtained by internal tests.
　Note that other problems may be occurred.
* The following operating conditions were tested with SMB connection.
　 It is not possible to connect to the computer with AppleTalk because
　 macOS 15 does not support AppleTalk.
* The software other than listed in the following table does not support macOS 15.
　

• Yes -> Functions normally.
• Yes* -> Operable, but partially has problems.
• No -> Cannot be used.

Product name	Ver	Operation	Status	Workaround	Plan to support
FineCut/Coat9 for Illustrator	3.3	Yes	It operates normally.	-	Complete
RasterLinkTools for Illustrator	1.19.0	Yes	It operates normally.	-	Complete
When using macOS 15 for RasterLink7 client	3.3.0	Yes	[Hot folder output] It operates normally. Operation is verified under Windows 10, Windows 11	-	Complete
		Yes	[Printer Driver output] Windows 10, Windows 11(21H2): It operates normally.	-	Complete
		No	[Printer Driver output] Windows 11(22H2 or later): Cannot be used.	-	Not supported
When using macOS 15 for RasterLink6Plus clientt	2.18	Yes	[Hot folder output] It operates normally. Operation is verified under Windows 10, Windows 11	-	Complete
		Yes	[Printer Driver output] Windows 10, Windows 11(21H2): It operates normally.	-	Complete
		No	[Printer Driver output] Windows 11(22H2 or later): Cannot be used.	-	Not supported
When using macOS 15 for RasterLinkPro5 client	4.80	Yes	[Hot folder output] It operates normally. Operation is verified under Windows 10, Windows 11	-	Complete
		Yes	[Printer Driver output] Windows 10, Windows 11(21H2): It operates normally.	-	Complete
		No	[Printer Driver output] Windows 11(22H2 or later): Cannot be used.	-	Not supported

---