* The following operating conditions are the results obtained by internal tests.
Note that other problems may be occurred.
* The software other than those below does not support Windows 8.1.
- Yes -> Functions normally.
- Yes* -> Operable, but partially has problems.
- No -> Cannot be used.
| Product name | Ver | Operation | Status | Workaround | Plan to support | |
|---|---|---|---|---|---|---|
| 32-bit | 64-bit | |||||
| Mimaki Driver | 3.40 | Yes | Yes | It operates normally. Note: The printer may show an error when the printer and the computer is connected with USB cable at the timing of upgrading from Windows8 to 8.1. |
When the printer shows the error, reboot the main power switch of the printer. | Completed |
| FineCut8 for Illustrator | 8.3 | Yes | Yes | It operates normally. Serial interface operates normally with USB serial adapter (OPT-SS036). |
Completed | |
| FineCut8 for CorelDRAW | 8.2.1 | Yes | Yes | It operates normally. Serial interface operates normally with USB serial adapter (OPT-SS036). |
Completed | |
| SimpleCut | 1.4 | Yes | Yes | It operates normally. Serial interface operates normally with USB serial adapter (OPT-SS036). |
Completed | |
| Mimaki ProfileMasterII |
3.02 | Yes | Yes | It operates normally. | Completed | |
| Mimaki Target Color Emulator |
1.1.0 | Yes | Yes | It operates normally. | Completed | |
| RasterLinkTools | 1.2 | Yes | Yes | It operates normally. | Completed | |
| SimpleStudio | 2.10 | Yes | Yes | It operates normally. | Completed | |
| RasterLink6 | 1.7.1 | Yes | Yes | It operates normally. | Completed | |
| RasterLinkPro5 series | 4.00 | Yes | Yes | It operates normally. | Completed | |
| RasterLinkPro4 series | 1.24 | No | No | RasterLinkPro4 cannot run in Windows8.1. RasterLinkPro4 does not support Windows8.1. |
It is possible to upgrade RasterLinkPro4 to RasterLinkPro5 without charge. | Not supported |
| RasterLink Pro III series | 1.22 | No | No | RasterLinkProIII cannot run in Windows8.1. RasterLinkProIII does not support Windows8.1. |
We recommend to purchase the RasterLinkPro5 series because you can use RasterLinkPro5 on Windows8.1. | Not supported |
| When using Windows 8.1 for RasterLink6 client | 1.5 | Yes | Yes | It operates normally. | Completed | |
| When using Windows 8.1 for RasterLinkPro5 client | 4.00 | Yes | Yes | It operates normally. | Completed | |
| When using Windows 8.1 for RasterLinkPro4 client | 1.24 | Yes | No | 【Printer Driver output】 [1] Data can be output using the printer driver from 32-bit Windows 8.1. [2] It cannot be connected from 64-bit Windows 8.1. |
[2] Please output the data from the hot folder when using Windows 8.1 64-bit for RasterLinkPro4 client. | Not supported on [2] |
| Yes | Yes | 【Hot folder output】 [1] Data can be output using the hot folder. |
Completed | |||
| When using Windows 8.1 for RasterLinkProIII client | 1.22 | Yes* | No | 【Printer Driver output】 [1] Data can be output using the printer driver from 32-bit Windows 8.1 to RasterLinkProIII installed in Windows Vista or XP. [2] It cannot be connected from 64-bit Windows 8.1. [3] It cannot be connected to Windows2000. |
[2] Please output the data from the hot folder when using Windows 8.1 64-bit for RasterLinkProIII client. | Not supported on [2],[3] |
| Yes* | Yes* | 【Hot folder output】 [1] Data can be output using the hot folder to RasterLinkProIII installed on Windows Vista or XP. [2] It cannot be connected to Windows2000. |
Not supported on [2] | |||