* The following operating conditions are the results obtained by internal tests.
   Note that other problems may be occurred.
* The following operating conditions were tested with SMB connection.
   It is not possible to connect to the computer with AppleTalk because Mac OS X 10.10 does not
   support AppleTalk.
* The software other than listed in the following table does not support Mac OS X 10.10.

• Yes -> Functions normally.
• Yes* -> Operable, but partially has problems.
• No -> Cannot be used.

Product name	Ver	Operation	Status	Workaround	Plan to support
FineCut8 for Illustrator	8.4.1	Yes*	It operates normally. Serial interface operates normally with USB serial adapter (OPT-SS036). *If running the installer in MacOS X 10.10, the computer may freeze up or fail to install the FineCut.	For MacOS X 10.10 user, please download upgrading installer of FineCut8 for Illustrator Ver.8.5.1	Completed
When using Mac OS X 10.10 for RasterLink6 client	3.2.1	Yes	[Printer Driver output] It operates normally.	-	Completed
		Yes	[Hot folder output] It operates normally.	-	Completed
When using Mac OS X 10.10 for RasterLinkPro5 client	4.21	Yes	[Printer Driver output] It operates normally.	-	Completed
		Yes	[Hot folder output] It operates normally.	-	Completed
When using Mac OS X 10.10 for RasterLinkPro4 client	1.24	Yes	[Printer Driver output] It operates normally.	-	Completed
		Yes	[Hot folder output] It operates normally.	-	Completed
When using Mac OS X 10.10 for RasterLink Pro III client	1.22	Yes*	[Printer Driver output] [1] Printer Driver is available to output the data from Mac OS X 10.10 to RasterLinkPro III installed into Windows Vista/XP. [2] It cannot be connected to Windows 2000.	-	Not supported on [2]
		Yes*	[Hot folder output] [1] Hot folder is available to output the data from Mac OS X 10.10 to RasterLinkPro III installed into Windows Vista/XP. [2] It cannot be connected to Windows 2000.	-	Not supported on [2]

---