* The following operating conditions are the results obtained by internal tests.
Note that other problems may be occurred.
* The software other than those below does not support Windows 8.1.
- Yes -> Functions normally.
- Yes* -> Operable, but partially has problems.
- No -> Cannot be used.
| Product name | Ver | Operation | Status | Workaround | Plan to support | |
|---|---|---|---|---|---|---|
| 32-bit | 64-bit | |||||
| Mimaki Driver | 4.1.3 | Yes | Yes | [New installation on Windows10] It operates normally. |
Completed | |
| Yes* | Yes* | [Upgrade the OS to Windows10 in the state you have already installed the software.] The printer may show an error when the printer and the computer is connected with USB cable at the timing of upgrading from Windows7, 8 or 8.1 to 10. |
When the printer shows the error, reboot the main power switch of the printer. | Completed | ||
| FineCut8 for Illustrator *1 | 8.5.3 | Yes | Yes | It operates normally. Serial interface operates normally with USB serial adapter (OPT-SS036). |
Completed | |
| FineCut8 for CorelDRAW *2 | 8.5.3 | Yes | Yes | It operates normally. Serial interface operates normally with USB serial adapter (OPT-SS036). |
Completed | |
| SimpleCut | 1.4 | Yes | Yes | It operates normally. Serial interface operates normally with USB serial adapter (OPT-SS036). |
Completed | |
| Printer Driver | 1.60 | Yes | Yes | It operates normally. | Completed | |
| Mimaki ProfileMasterII |
4.40 | Yes | Yes | It operates normally. | Completed | |
| Mimaki Target Color Emulator |
1.2.3 | Yes | Yes | It operates normally. | Completed | |
| RasterLinkTools for Illustrator *1 |
1.3.1 | Yes | Yes | It operates normally. | Completed | |
| RasterLinkTools for CorelDRAW *2 |
1.3 | Yes | Yes | It operates normally. | Completed | |
| SimpleStudio | 2.10 | Yes | Yes | It operates normally. | Completed | |
| RasterLink6 | 4.7 | Yes* | Yes* | It operates normally. [1] When using Windows XP as a client computer, printer driver output is not available. [2] When using Mac OS X 10.3, 10.4 as a client computer, it cannot be connected to RasterLink6. |
[1] Please output the data from the hot folder when using Windows XP as the client computer for RasterLink6. | Completed |
| RasterLinkPro5 series | 4.50 | Yes* | Yes* | It operates normally. [1] When using Windows XP as a client computer, printer driver output is not available. [2] When using Mac OS X 10.3, 10.4 as a client computer, it cannot be connected to RasterLinkPro5. |
[1] Please output the data from the hot folder when using Windows XP as the client computer for RasterLinkPro5. | Completed |
| RasterLinkPro4 series | 1.24 | No | No | You can not successfully install the software on Windows10. | Not supported | |
| RasterLink Pro III series | 1.22 | No | No | You can not successfully install the software on Windows10. | Not supported | |
| When using Windows 10 for RasterLink6 client | 4.3 | Yes | Yes | It operates normally. | Completed | |
| When using Windows 10 for RasterLinkPro5 client | 4.40 | Yes | Yes | It operates normally. | Completed | |
| When using Windows 10 for RasterLinkPro4 client | 1.24 | Yes | Yes | It operates normally. | Completed | |
| When using Windows 10 for RasterLinkProIII client | 1.22 | Yes* | No | [Printer Driver output] [1] Data can be output using the printer driver from 32-bit Windows 10 to RasterLinkProIII installed in Windows Vista or XP. [2] It cannot be connected from 64-bit Windows 10. [3] It cannot be connected to RasterLinkProIII installed on Windows2000. |
[2] Please output the data from the hot folder when using Windows 10 64-bit for RasterLinkProIII client. | Not supported on [2],[3] |
| Yes* | Yes* | 【Hot folder output】 [1] Data can be output using the hot folder to RasterLinkProIII installed on Windows Vista or XP. [2] It cannot be connected to RasterLinkProIII installed on Windows2000. |
Not supported on [2] | |||
*1: Validated in Adobe Illustrator CC2014.
*2: Validated in CorelDRAW Graphics Suite X7, Technical Suite X7