* The following operating conditions are the results obtained by internal tests.
   Note that other problems may be occurred.
* The following operating conditions were tested with SMB connection.
   It is not possible to connect to the computer with AppleTalk because macOS 10.12 does not
   support AppleTalk.
* The software other than listed in the following table does not support macOS 10.12.

• Yes -> Functions normally.
• Yes* -> Operable, but partially has problems.
• No -> Cannot be used.

Product name	Ver	Operation	Status	Workaround	Plan to support
FineCut8 for Illustrator	8.6.2.1	Yes	It operates normally. Serial interface operates normally with USB serial adapter (OPT-SS036).	-	Completed
RasterLinkTools for Illustrator	1.4.1	Yes	It operates normally.	-	Completed
When using macOS 10.12 for RasterLink6 client	5.13	Yes	[Printer Driver output] It operates normally.	-	Completed
		Yes	[Hot folder output] It operates normally.	-	Completed
When using macOS 10.12 for RasterLink5 client	4.70	Yes	[Printer Driver output] It operates normally.	-	Completed
		Yes	[Hot folder output]] It operates normally.	-	Completed
When using macOS 10.12 for RasterLink4 client	1.24	Yes	[Printer Driver output] It operates normally.	-	Completed
		Yes	[Hot folder output] It operates normally.	-	Completed
When using macOS 10.12 for RasterLink Pro III client	1.22	Yes*	[Printer Driver output] [1] Printer Driver is available to output the data from macOS 10.12 to RasterLinkPro III installed into Windows Vista/XP. [2] It cannot be connected to Windows 2000.	-	Completed
		Yes*	[Hot folder output] [1] Printer Driver is available to output the data from macOS 10.12 to RasterLinkPro III installed into Windows Vista/XP. [2] It cannot be connected to Windows 2000.	-	Completed

---