- You need the following systems.
【When connecting to one PC】
・Adobe Illustrator or CorelDRAW send Print&Cut data to [RasterLink6*2] via
[FineCut8*1] or [RasterLinkTools*1]. Your PC*2 is connected to the printer with
USB2.0 cable*2.
[RasterLink6], [FineCut8] and [RasterLinkTools] come with the printer.
*1
・[FineCut8] and [RasterLinkTools] are plug-in software for Adobe Illustrator and
CorelDRAW.
・Refer to [Environment] on FineCut8 web site to see the operation environment
for [FineCut8].
Click here to see the Finecut8 web site for Adobe Illustrator.
Click here to see the Finecut8 web site for CorelDRAW.
・Go to 『RasterLink6 Installation guide』->[RasterLinkTools installation / Version
upgrade] to see the operation environment for [RasterLinkTools].
*2
・You need another PC with Windows OS installed and USB2.0 cable* to install
[RasterLink6] other than the main unit of CJV150/300.
(You may purchase "*" marked parts as optional supply products.)
・Refer to [Environment] on RasterLink6 web site to see the operation environment
for [RasterLink6].
【When connecting numbers of PCs】
・When constructing LAN with numbers of PCs, you allow the PC with RIP
installed*1 to be a host PC (server).
・ Adobe Illustrator or CorelDRAW send Print&Cut data to the host PC with
[RasterLink6*1,2] installed via [FineCut8*2] or [RasterLinkTools*2]
through Ethenet cables.
Connect the host PC and the printer with USB2.0 cable.
[RasterLink6], [FineCut8] and [RasterLinkTools] come with the printer.
*1
・You need another PC with Windows OS installed and USB2.0 cable* to install
[RasterLink6] other than the main unit of CJV150/300.
(You may purchase "*" marked parts as optional supply products.)
・Refer to [Environment] on RasterLink6 web site to see the operation environment
for [RasterLink6].
*2
・[FineCut8] or [RasterLinkTools] are plug-in software for Adobe Illustrator and
CorelDRAW
・Refer to [Environment] on FineCut8 web site to see the operation environment
for [FineCut8].
Click here to see the Finecut8 web site for Adobe Illustrator.
Click here to see the Finecut8 web site for CorelDRAW.
・Go to 『RasterLink6 Installation guide』-> [RasterLinkTools installation / Version
upgrade] to see the operation environments for [RasterLinkTools].