It is decorated with a luxurious feeling and a unified sense of design based on the concept of a hotel room.
All can be created with Mimaki printer from wallpaper, bed cover to small articles such as toiletry bottle and room key.
Wall paper
Instructions
- Print a image on the wall paper.
- Paste glue and then apply on the wall.
Floor (Needle punched carpet)
Instructions
- Print a mirror image on the transfer paper.
- Transfer the image from the paper to the carpet by heat pressing at 190 degree C/ 374 degree F.
- Install the carpet on the floor.
Curtain
Instructions
- Print a mirror image on the transfer paper.
- Transfer the image to from the paper to fabric by heat pressing at 190 degree C/ 374 degree F.
- Cut and then sew fabric.
Fabric panel
Instructions
- Print a mirror image on the transfer paper.
- Transfer the image to from the paper to fabric by heat pressing at 190 degree C/ 374 degree F.
- Cut fabric
- Apply the fabric to the wooden flames.
Bed sheet / Comforter cover
Instructions
- Print a mirror image on the transfer paper.
- Transfer the image to from the paper to fabric by heat pressing at 190 degree C/ 374 degree F.
- Cut and then sew fabric.
Pillowcase
Instructions
- Print a mirror image on the transfer paper.
- Transfer the image to from the paper to fabric by heat pressing at 190 degree C/ 374 degree F.
- Cut and then sew fabric.
Bed liner
Instructions
- Print a mirror image on the transfer paper.
- Transfer the image to from the paper to fabric by heat pressing at 190 degree C/ 374 degree F.
- Cut the fabric by a heat cutter.
Notepad + Pen
Instructions
- Measure the size of note blocks and pens, and adjust the print image.
- Print a image on objects by UV printer.
Lamp shade
Instructions
- Print a mirror image on the transfer paper.
- Transfer the image to from the paper to fabric by heat pressing at 190 degree C/ 374 degree F.
- Cut the fabric by a heat cutter.
- Apply the fabric around the lamp shade.
Room key
Instructions
- Print a image on the card by UV printer.
- Print a image on a reverse side.
Toiletry bottles
Instructions
- Place and fix the bottle firmly on the print table. When the bottle is unstable on the table, place it on clay.
- Print a image on the bottle by UV printer.
Emergency evacuation map
Instructions
- Cut the acrylic panel.
- Print a image on the panel by UV printer.
Door hanger
Instructions
- Cut the acrylic sheet by a laser cutter.
- Print a image on the acrylic by UV printer.
- Print a image on a reverse side.
