CFX Series | Product information
Nagano, Japan, March 29, 2024
Mimaki Engineering Co., Ltd. (Head office: Tomi-shi, Nagano, Pref.; President: Kazuaki Ikeda), specializing in industrial inkjet printers, cutting plotters and 3D printers, will exhibit the CFX series of flatbed cutting plotters with the high cutting speed and processing pressure in the high-end class at the "ISA International Sign Expo 2024" to be held from April 10, 2024 and will begin worldwide sales in June.
Since the release of the CF-120 flatbed cutting plotter in 1991, we have expanded our lineup to include the CFL-605RT entry-level model, the CF2 series and the CF3 series mid-range models, all of which have earned high acclaim in the market. We have now added the "CFX Series" lineup as a high-end model with significantly improved cutting speed and processing pressure from the previous lineup, and also our first "V-cut" compatible model.
Overview of the CFX series
- High-end machine with best-in-class operating speed and machining pressure
- Up to four types of machining tools can be mounted simultaneously. Reduces tool change frequency in continuous machining of various materials.
- Two types of cutting modes, "position control mode" and "pressure control mode," can be used to achieve high-quality machining.
- Accurate machining with no overcut or leftover material across the entire machining table area of up to 2.5 x 5.0 meters.
- Accurate machining of the back side of the material in accordance with the print position on the front side
- 3 types of table sizes are available (2.5m wide by 1.3m long, 2.5m by 3.1m wide, and 2.5m by 5.0m long). Expansion of the machining table is possible even after the CFX is installed.
The CFX series has a lineup of various processing tools for different applications, and we will offer those combinations within three types of package models (-IC/-EC/-LC) for customers to choose from at the time of purchase.
- -IC package model
Entry-level package with minimal tools. Capable of producing containers by processing cardboard and trimming film and thin foam to produce stickers, labels, panels, and other sign graphics. Additional router tools can be purchased later for a total sign graphics production solution. - -EC package model
A mid-range package that adds a reciprocating (vibration) tool and a V-cut tool to the IC package model. In addition to cardboard, various types of corrugated board processing is available, enabling production of containers in general and fixtures using reinforced corrugated board. - -LC package model
Top of the line-up EC package model with router tool included. It can produce containers and all sign graphics.
The CFX Series is expected to sell 80 units per year (worldwide).
Mimaki Engineering Co., Ltd. with its management vision of “Something New, Something Different,” will continue to pursue new technological innovations to achieve the “beauty and speed” that our customers demand.
Exhibition overview
Name: ISA International Sign Expo 2024
Dates: April 10, 2024[Wed] - April 12, 2024[Fri]
Place: Orange County Convention Center – South Building (Orlando Florida, USA)
Stand #: 1435
Main features
1. High-end machine with best-in-class operating speed and machining pressure
This industry-leading flatbed cutting plotter achieves a maximum operating speed of 100 cm and a processing pressure of 30 kg.
2. Up to four types of machining tools can be mounted simultaneously. Reduces tool change frequency in continuous machining of various materials.
In addition to the standard pen tool, three types of machining tool slots are provided, allowing simultaneous mounting of any combination of a push-off tool, reciprocating tool, V-cut tool, ruled tool, and router tool (to be available in July). Even when alternately machining different materials, it reduces the time required for troublesome tool changes and adjustments.
3. Two types of cutting modes, "position control mode" and "pressure control mode," are used to achieve high quality machining.
Position control mode...When processing hard materials, the depth of material processing is specified and the material is cut off little by little to achieve a clean cut surface.
Pressure control mode...Reduces ruled liner cracking in the width direction ruled processing of soft corrugated board.
4. accurate machining with no overcut or leftover material across the entire machining table area up to 2.5 x 5.0 meters
The height accuracy of the entire table area is automatically measured when the CFX is installed, and the system operates in accordance with the accuracy during machining. (Table plane tracking function) Realizes high-quality machining of V-cuts, where machining quality is critical due to excessive cutting and left-over cutting.
5. Accurate machining of the back side of the material in accordance with the print position on the front side
Equipped with a new camera unit (sold separately for some specifications), accurate cutting is possible even when the printing surface is turned over.
When using thick materials or tools with a wide blade width, it is possible to produce good-looking shapes without leaving blade marks on the printed surface.
6. 3 types of machining table sizes are available, and the machining table can be expanded even after the CFX is installed.
- CFX-2513…Maximum processing size 1,300mm x 2,540mm
We can consistently process standard sizes (4x8 boards) for sign and graphic materials. - CFX-2531…Maximum processing size 3,190mm x 2,540mm
4x8 plates can be set at the front and rear of the table and processed alternately. While one material is being processed, the other material can be exchanged and cleaned manually. This eliminates operator waiting time and improves production efficiency. - CFX-2550…Maximum processing size 5,080mm x 2,540mm
We can process sign banners, packages, and construction materials up to 5m in length.
Size can be expanded by adding processing tables after initial installation. We support the growth of your processing business.
*Table extensions are available up to a maximum size of 2550. Additional charges apply.
Product Specifications
| Items | CFX-2513 | CFX-2531 | CFX-2550 | |
|---|---|---|---|---|
| Valid Range | 1,300 x 2,540 mm (51.2 x 100.0 in) | 3,190 x 2,540 mm (125.6 x 100.0 in) | 5,080 x 2,540 mm (200.0 x 100.0 in) | |
| Settable material size | 1,890 x 2,570 mm (74.4 x 101.2 in) | 3,780 x 2,570 mm (148.8.4 x 101.2 in) | 5,670 x 2,570 mm (223.2 x 101.2 in) | |
| Driving Method | X/Y axis：AC servo motor Z/Θ axis：DC servo motor | |||
| Command | MGL-3C (HPGL standard) | |||
| Interface | RS-232C, Ethernet | |||
| Safety standard | VCCI-class A, FCC-class A, CE Marking, CB Report (EN62368), UL62368-1, Machinery directive, RoHS, REACH | |||
| Operational environment | Temperature | 5℃～35℃ | ||
| Humidity | 35～75％Rh | |||
| Accuracy guaranteed temperature | 20℃～25℃ | |||
| Temperature gradient | ±10℃/h or less | |||
| Power Specifications | 200～240V single phase 50/60Hz 12A or less | |||
| Power consumption (max) | CFX unit：3000W or less | |||
| Dimensions (W×D×H) | 4,050x2,150x1,500 mm (159.4x84.6x59.1 in) | 4,050x4,050x1,500 mm (159.4x159.4x59.1 in) | 4,050x5,950x1,500 mm (159.4x234.3x59.1 in) | |
| Weight | 440 kg (970.0 lb) | 660 kg (1455.1 lb) | 880 kg (1940.1 lb) | |
*Specifications, designs, dimensions, and other information stated in this list may be subject to change without notice due to technical improvement etc.
About Mimaki Engineering
Mimaki Engineering develops, manufactures, sales, and maintains industrial inkjet printers, cutting plotters, 3D printers, inks, and software. By providing total solutions for the printing process for the sign graphics, industrial products, and textile apparel markets, we aim to be an innovator that constantly delivers "Something New, Something Different" to our customers.
Company/IR website: https://ir-eng.mimaki.com/
Product website: https://mimaki.com/
Contact
MIMAKI ENGINEERING CO., LTD.
Global Marketing Department
1628-1 Shigeno-Otsu, Tomi-city, Nagano 389-0512 JAPAN
Tel: +81-(0)268-80-0078 / Fax: +81-(0)268-80-0041