It is a lovely cafe style aimed at women. Print on existing materials of woodgrain or tile pattern with colorful flowers and lights will add an effect of original and harmonized design of interior decoration.
Wall paper
Instructions
- Print an image on the wall paper.
- Paste glue and then apply on the wall.
Counter
Instructions
- Print a image on the wall paper.
- Paste glue and then apply on the wall.
Floor
Instructions
- Printing on the film.
- Drying: Solvent print; For 24 h or more. UV print; Unnecessary.
- Laminating
- Apply the sheet on the floor.
Retractable awning
Window
Instructions
- Multi-layer printing on the film. Three-layers (Color - White - Color)
- Cut the film according to the window size.
- Clean the window surface.
- Apply the film from the top of window with a squeegee while peeling the film liner.
For details, please see [How to] Window film.
Fridge
Instructions
- Printing on the film.
- Cut the film according to the fridge size.
- Peel off the top of film liner to 3 cm.
- Apply the film from the top of window with a squeegee while peeling the film liner.
Lamp shade
Instructions
- Printing on the film for illuminated signage.
- Cut the printed film.
- Apply the film to a lamp shade.
Note: To apply the film without wrinkles and bubbles, please consider the film size and select adequate surface of the lamp shade.
Table
Instructions
- Printing on the film.
- Cut the printed film.
- Apply the film on the table surface.
Cafe uniform (T-shirt)
Instructions
- Add contour cut lines and register marks to printing data by Mimaki [FineCut9].
- Print and cut the rubber sheet by CJV150.
- Apply the sheet on to the application film.
- Heat pressing for 10 seconds at 190 degree C / 374 degree F.
For details, please see Apron (Rubber transfer).
Menu
Instructions
- Preparing an artificial leather cover and wood panel.
- Printing directly on the cover and the plate by UV printer.
Mug
Instructions
- Prepare a mug for sublimation transfer printing.
- Print a mirror image to the transfer paper.
- Heat press at 190 degree C/ 374 degree F.
Ash tray
Instructions
- Prepare an ash tray: A trasnparent one with smooth surface is better.
- Place the ash tray upside down on the print table.
- Printing directly a mirror inverted image by UV printer.
Coaster
