Specifications

NEXA-160UV
Print head		On-demand piezo print head (4 staggered layout)
Print resolution		600 dpi, 1,200 dpi
Head gap		By manual 3 levels (1.5/2.0/2.5 mm)
Ink	Type/Color	UV-curable ink ALS-150 *1 (C, M, Y, K, W, Cl)
	Capacity	1 kg bottle
Maximum print width		1,610mm (63.4")
Media	Width	210 - 1,620mm (8.3 - 63.8")
	Roll diameter	φ180 mm (7.1") or less
	Roll weight	25 kg (55.1 lb) or less [45 kg (99.2 lb) or less with option *2]
	Core diameter	2 inch / 3 inch
Interface		Ethernet 1000BASE-T / USB2.0
Certifications		China RoHS
Power supply		Single phase (AC220-240V±10% / 10 A), 50/60±1Hz
Power consumption		Maximum: 2,000 W or less / Typical: 550 W / Minimum: 10 W or less
Operational environment		Temperature: 20–30 °C (68–86 °F) Humidity: 35–65% Rh (Non condensing) Recommended temperature: 20–25 °C (68–77 °F) Dust level: General office level
Dimensions (W×D×H)		3,100ｘ745ｘ1,400 mm (122.0 x 29.3 x 55.1")
Weight		202 kg (445.3 lb)

*1 ALS-150 ink is available in specific countries and regions.
*2 With the OPT-J0502 Level Foot attached, supports media up to 45 kg (99.2 lb).

---

Ink set

---

ALS-150 ［C,M,Y,K,W,Cl］	C　M　Y　K　W　Cl

• Some of the samples in this website are artificial renderings.
• Specifications, design and dimensions stated in this website may be subject to change without notice (for technical improvements, etc).
• The corporate names and merchandise names written on this website are the trademark or registered trademark of the respective corporations.
• Inkjet printers print using extremely fine dots, so colors may very slightly vary after replacement of the printing heads. Also note that if using multiple printer units, colors could vary slightly from one unit to other unit due to slight individual differences.

Precautions for UV printing

Inks and substrates:

• Please note that properties and adhesion, weather resistance etc. of ink and substrates can vary. Therefore please test materials before printing.
• Some substrates require primer before printing. Please test materials beforehand or ask your sales representative.

Safety notice:
You are dealing with UV light sources that may harm your health. Please follow below guidelines strictly:

• Do not look directly into the UV light source nor place your hand, or expose your skin directly to the UV light source.
• Depending upon print mode, there might occur some VOC emittance from printed parts not yet cured and hardened.
• In addition, please read the instructions and guidelines of the manual carefully and follow those.

---