Specifications

Tiger600-1800TS with Water-based pigment ink AP50
Printhead		On-demand piezo head
Number of heads		8 units (4 in-lined x 2 staggered layout)
Print resolutions		300, 600, 1200 dpi
Maximum print width		1,850 mm (72.8")
Minimum print width		210 mm (8.3")
Maximum media width		1,900 mm (74.8")
Paper core diameter		3 inches
Media roll diameter		Φ600mm or less (≤ 23.6")
Media weight		300kg or less (≤ 661.4 lb.)
Ink	Type/Color	Water-Based Pigment Ink AP50 (C/M/Y/K)
	Content	10kg ink Tank
Interface		Ethernet 10GB-T / USB3.1, USB2.0 (via removal disk)
Operation method Operation software		Built-in touch panel Exclusive Software MPC (Mimaki Print Controller)
RIP Software		RasterLink7
Certifications		ETL IEC 62368-1, CE Marking (EMC, Low voltage, Machinery directive, and RoHS), CB, REACH, KC, UKCA
Power		3φ 380-415V ± 5%, 50/60Hz ± 1%, 25A
Operational environment	Temperature	20-30 degC / 68-77 degF
	Humidity	35 - 65% Rh (Non condensing)
	Dust level	0.15㎎/㎥ or less (Equivalent to a general office floor level)
	Maximum operating altitude	2,000m
Power consumption	Max. operating	15.0kW or less
	Standby	1.0kW or less
Dimensions (W×D×H)		5,300x2,800x1,900mm (209x110x75")
Weight		1,620kg or less (≤3,572 lb.) *1 *2

*1: Total of entire system
*2: Media and ink weight are excluded

Ink set

AP50 ［C,M,Y,K］	C　M　Y　K

• Some of the samples in this website are artificial renderings.
• Specifications, design and dimensions stated in this website may be subject to change without notice (for technical improvements, etc).
• The corporate names and merchandise names written on this website are the trademark or registered trademark of the respective corporations.
• Inkjet printers print using extremely fine dots, so colors may very slightly vary after replacement of the printing heads. Also note that if using multiple printer units, colors could vary slightly from one unit to other unit due to slight individual differences.

---