Specification

Specifications

		CG-75FXII Plus	CG-130FXII Plus	CG-160FXII Plus
Acceptable sheet width		90mm~1,040mm (3.54"~40.9")	90mm~1,580mm (3.54"~62.0")	90mm~1,880mm (3.54"~74")
Rolled media weight		18kg (40 lb) or less		22kg (49 lb) or less
Roll outsied diameter		φ200mm (7.87") or less
Effective cutting area *1		760mm x 51m (29.9" x 167')	1,300mm x 51m (51.2" x 167')	1,600mm×51m (62.9"×167’)
Maximum auto cutting width *2		870mm (34.2")	1,425mm (56.1")	1,720mm (67.7")
Maximum cutting speed		100cm/s (39.3"/s)
Maximum moving speed		140cm/s (55"/s) (In a 45° direction and in a pen-up state)
Adjustable speed range *3		1-10cm/s : 1cm step adjustment (0.39"-3.94"/s : 0.39" step adjustment) 10-50cm/s : 5cm step adjustment (3.94"-19.68"/s : 2" step adjustment) 50-100cm/s : 10cm step adjustment (19.68"-39.37" : 3.94" step adjustment)
Mechanical resolution		5µm (0.0002")
Command resolution		25μm, 10μm(MGL-IIc), 100μm, 50μm(MGL-Ic1)
Repeatability		±0.2mm (Excluding shrinkage / expansion caused by the film temperature)
Accuracy assurance range (Repeatability)		760mm x 10m (29.9" x 32.8')	1,300mm x 10m (51.2" x 32.8')	1,600mm x 10m (63.0" x 32.8')
Max. pressure		500g
Range of down pressure	Cutter	10~20g(2g step), 20~100g(5g step), 100~500g(10g step)
	Pouncing	10~20g(2g step), 20~100g(5g step), 100~500g(10g step)
	Pen	10~20g(2g step), 20~100g(5g step), 100~150g(10g step)
Acceptable sheet *4		Vinyl up to 0.25mm(0.01")thickness, Fluorescent type vinyl Reflective sheet
Acceptable sheet for pouncing *5		Paper thickness: 0.06~0.13mm (0.0024"~0.005")
Applicable tools *6		Cutter, Water based ball-point pen, Oil based ball-point pen, Pouncing tool
Certifications		VCCI class A, FCC class A, ETL IEC 60950-1 CE Marking (EMC, Low voltage, Machinery directive, and RoHS), CB, REACH, RCM, EAC
Type of command		MGL-II c / I c1
Interface		RS-232C, USB
Receiver buffer size		30MB Standard (20MB when in sorting)
Operational environment		Temperature: 5~35°C (41~95°F), 35%–75% RH (Non-condensing)
Power requirement		AC100V~240V　1A 50/60Hz
Power consumption		100W or less
Dimensions (WxDxH)		1,285mm(50.5")x 700mm(27.5")x 1,217mm(47.9")	1,825mm(71.8")x 700mm(27.5")x 1,217mm(47.9")	2,125mm(83.6")x 700mm(27.5")x 1,217mm(47.9")
Weight (with stands)		47kg (104 lb)	62kg (137 lb)	70kg (154 lb)

*1: Maximum sheet feeding length differs depending on the software.
*2: Sheet width to cut off from the roll.
*3: Restricted sheet width.
*4: Provided that the blade specific to fluorescent type vinyl (SPB-0007) and the blade specific to reflective sheet (SPB-0006) are used.
*5: Pouncing tool intended specifically for pouncing shall be used.
*6: The goods on the market are φ8~φ9 Pen. Accuracy and image quality are not guaranteed.

Some of the screens and printing samples in this website are artificial renderings.
Specifications are subject to change without notice.
All trademarks or registered trademarks are the property of the respective owners.

CG-FXII Plus Series Catalog (4.04MB)

Model

CG-75FXII Plus	Effective cut width: 760 mm (29.9")
CG-130FXII Plus	Effective cut width: 1,300 mm (51.2")
CG-160FXII Plus	Effective cut width: 1,600 mm (63.0")