JV33 Series [end of support]

Specifications

 JV33-130JV33-160JV33-260
Head
On-demand Piezo head (180nozzles x 8 lines) x1 head
Maximum print width 1,361mm (53.5") 1,610mm (63.3") 2,632mm (103.6")
Printing resolution 540,720,1,440dpi
Printing mode
(scan x feed)
540 x 720dpi, 540 x 900dpi, 540 x 1,080dpi
720 x 540dpi, 720 x 720dpi, 720 x 1,080dpi,
720 x 1,440dpi
1,440 x 1,440dpi
InkInk Exclusive Solvent ink: ES3 ink, SS21 ink
Exclusive aqueous pigment ink
Exclusive Sublimation ink
Capacity 4-color mode:440cc cartridge x 2/color, 880cc/color
6-color mode:440cc cartridge x 1/color, 440cc/color
MediaSize 1,371mm (53.9") 1,620mm (63.9") 2,642mm (104.0")
Roll weight Less than 25kg (55.1lbs.) Less than 100kg (220lbs.)
Print surface Roll inside diameter
Roll inside diameter 2 inch or 3 inch
Media cutting Cutting on Y direction by cutter at the head
Media heater Triple stage intelligent heater (Pre/Print/Post)
Media Take-up device Roll take-up device (standard), inside/outside selectable
Interface USB2.0
Applicable standards VCCI Kelas A , FCC Kelas A, UL 60950-1
CE Marking (EMC directive, Low voltage directive),
CB report
Power AC100~120V±10%, AC220~240V±10%,
50/60Hz
±1Hz
Power consumption Less than 1,440 VA Less than 1,440 VA x 2 plugs
Operation environments Usable temperature:20°C~35°C (64~95°F),
Humidity
:35~65%RH (No condensation)
Dimensions (W x D x H) 2,289 x 739 x 1,424mm
(90.1" x 29.1" x 56.1")
2,538 x 739 x 1,424mm
(99.9" x 29.1" x 56.1")
3,650 x 1,302 x 1,424mm
( 143.7" x 51.3" x 56.1")
Weight 145kg (320lbs.) 160kg (353lbs.) 450kg (992lbs.)

Ink set

ES3
[C,M,Y,K,Lc,Lm,W,Si]
C M Y K
C M Y K Lc Lm
C M Y K Lc Lm W Si
SS21
[C,M,Y,K,Lc,Lm,W]
C M Y K
C M Y K Lc Lm
C M Y K Lc Lm W
Water-based pigment Ink SPC-0494
[C,M,Y,K,Lc,Lm]
C M Y K
C M Y K Lc Lm
Sb53
[Bl,M,Y,K,Lbl,Lm]
Bl M Y K
Bl M Y K Lbl Lm
Sb54
[Bl,M,Y,K,Lbl,Lm]
Bl M Y K
Bl M Y K Lbl Lm
  • Some of the samples in this website are artificial renderings.
  • Specifications, design and dimensions stated in this website may be subject to change without notice (for technical improvements, etc).
  • The corporate names and merchandise names written on this website are the trademark or registered trademark of the respective corporations.
  • Inkjet printers print using extremely fine dots, so colors may very slightly vary after replacement of the printing heads. Also note that if using multiple printer units, colors could vary slightly from one unit to other unit due to slight individual differences.

JV33 Series Catalog (2.14MB)

Model

JV33-130 Maximum print width: 1,361 mm (53.6")
JV33-160 Maximum print width: 1,610 mm (63.4")
JV33-260 Maximum print width: 2,632 mm (103.6")

Related products

Return to Content

PAGETOP