JV5 Series [end of support]

Specifications

 JV5-130SJV5-160SJV5-320S
Print Head On-demand Piezo head (Array of 4 staggered print heads)
Maximum printing width 1,365mm 1,620mm 3,290mm
Printing resolution 540、720、1,440 dpi
Printing mode
(Scan x Feed)
540×720dpi、540×900dpi、540×1,080dpi
720×540dpi、720×720dpi、720×1,080dpi、720×1,440dpi
1,440×1,440dpi
InkKind
Exclusive solvent ink: ES3, HS, SS21
Exclusive aqueous pigment ink : Eco-PA1
Exclusive dye-sublimation ink : Sb53, Sb54
Exclusive solvent ink: ES3, HS, SS21
Exclusive dye sublimation ink : Sb53, Sb54
Supply Automatic change of double ink cartridges
Capacity 6 color mode: 440 cc cartridge x 2/color, 880 cc/color
4 color mode: 440 cc cartridge x 4/color, 1760 cc/color
Media
specification
SizeMax Max. width 1,375 mm (54.13")
Max. width 1,630 mm(64.17")
Max. width: 3,300 mm (129.9")
Min Min. width 297 mm (11.6")
Thickness 1.0 mm or below
Roll weight 38 kg (83.7lbs.) or below 130 kg (286.6 lbs) or below
Printing surface Face out Face out/ face in
Inner diameter of
paper bobbin/
outer diameter
of roll
2 inch, 3 inch / f200 mm (7.87") or below Inside: 3inch / Outside: Less than φ250mm (9.8")
Media cutting Cutting in Y direction by cutter at the head
Media heater 3 way intelligent heater (PRE/PRINT/POST)
Media take-up device Automatic take-up device, Inside/outside selectable 3 inch paper bobbin; Outer diameter 300 mm or less
Nozzle checking unit (NCU) Laser system (Class 1 or below)
Print gap 1.5 mm to 7 mm, step-less & user setting
(Automatic detection of media thickness)
Interface USB2.0
Applicable standard VCCI Class A, FCC Class A, UL 60950,
CE Marking (EMC Directive, Low Voltage Directive) , CB Report, RoHS
Power source specification AC 200V to 240V ±10%, 50/60 Hz ± 1Hz 15 A or below AC 200V to 240V ±10%, 50/60Hz ±1Hz, 30A or below
Power consumption 3,600 VA or below 7,200 VA or below
Operating environment Usable temperature: 20°C to 35°C, Humidity: 35 % to 65%Rh,
Not condensing
Outer
dimension
(W×D×H)
2,860 x 1,050 x 1,540 mm
(112.6" x 41.4" x 60.7")
3,120 x 1,050 x 1,540 mm
(122.9" x 41.4" x 60.7")
5,170 x 1,610 x 1,640 mm or below
Weight 324 kg (713.7lbs.) or below 333 kg (733.5lbs.) or below 1,200 kg (2,646 lbs) or below

Ink set

ES3
[C,M,Y,K,Lc,Lm]
C M Y K
C M Y K Lc Lm
HS
[C,M,Y,K,Lc,Lm]
C M Y K
C M Y K Lc Lm
SS21
[C,M,Y,K,Lc,Lm]
C M Y K
C M Y K Lc Lm
Water-based pigment Ink SPC-0494
[C,M,Y,K,Lc,Lm]
C M Y K
C M Y K Lc Lm
Sb53
[Bl,M,Y,K,Lbl,Lm]
Bl M Y K
Bl M Y K Lbl Lm
Sb54
[Bl,M,Y,K,Lbl,Lm]
Bl M Y K
Bl M Y K Lbl Lm
  • Some of the samples in this website are artificial renderings.
  • Specifications, design and dimensions stated in this website may be subject to change without notice(for technical improvements, etc).
  • The corporate names and merchandise names written on this website are the trademark or registered trademark of the respective corporations.
  • Inkjet printers print using extremely fine dots, so colors may very slightly vary after replacement of the printing heads. Also note that if using multiple printer units, colors could vary slightly from one unit to other unit due to slight individual differences.
  • Also note that if using multiple printer units, colors may slightly vary from one unit to other units due to slight individual difference.
  • Automatic take-up device is included as standard.

Model

JV5-130S Maximum print width: 1,365 mm (53.7")
JV5-160S Maximum print width: 1,620 mm (63.8")
JV5-320S Maximum print width: 3,290 mm (129.5")

Related products

Return to Content

PAGETOP