Specifications

UJF-706
Head		On-demand Piezo head
Print resolution		600 × 600 dpi, 1200 × 1200 dpi
Ink	type	Hard UV curable ink : 6 colors (CMYKLcLm) + W + CL
		Flexible UV curable ink : 6 colors (CMYKLcLm) + W
	Capacity	440 ml / cartridge
Waste ink tank		4,000 ml
Maximum print width		Width : 700 mm (27.6 "), Length : 600 mm (23.6 ")
Media	Width	Width : 710 mm (28.0 "), Length : 605 mm (23.8 ")
	Thickness	Mini. 0.05 mm (0.002 "), Max. 150 mm (5.91 ")
	Weight	Less than 10 kg (22 lbs)
	Set device	Air suction by vacuum
UV device		Equipped with UV lamp
Interface		USB 2.0
Applicable standard		VCCI class A, FCC class A, UL, RoHS Directive, CE Marking, CB Report
Power specifications		Single-Phase AC 200 - 240 V
Power consumption		Less than 4.0 kVA
Operational environment	Temperature	15 - 30 °C (59 - 86 °F)
	Humidity	35 - 65 % Rh
	Accuracy guarantee temperature	18 - 25 °C (64 - 77 °F)
	Temperature gradient	Less than ±10 °C/h (18 °F)
	Dust	Equivalent to normal office level
Weight		505 kg (1,112 lbs.)
Dimensions (D x W x H)		1,750 mm x 2,500 mm x 1,550 mm (68.9 " x 98.4 " x 61.0 ")

*Inks would not be cured when printing speed is faster than that of draft mode.

• All trademarks or registered trademarks are the property of their respective owners.
• Specifications are subject to change without notice.
• Some of the screens and printing samples in this website are artificial renderings.
• Inkjet printers print using extremely fine dots, thus colors may vary slightly following replacement of the printing heads. Also note that if using multiple printer units, colors may vary slightly among the units due to slight individual differences among the units.

---

Inks and substrates:

• Please note that properties and adhesion, weather resistance etc. of ink and substrates can vary. Therefore please test materials before printing.
• Some substrates require primer before printing. Please test materials beforehand or ask your sales representative.

---

Safety notice:
You are dealing with UV light sources that may harm your health. Please follow below guidelines strictly:

• Do not look directly into the UV light source nor place your hand, or expose your skin directly to the UV light source.
• Depending upon print mode, there might occur some VOC emittance from printed parts not yet cured and hardened.
• In addition, please read the instructions and guidelines of the manual carefully and follow those.

---