Specifications

		UJV200-130	UJV200-160
Print head		On-demand piezo print head
Print resolution		Y: 600, 900, 1,200 dpi　X: 600, 1,200 dpi
Head gap		By manual 2 levels (1.5/2.0 mm)
Ink	Type/Color	UV-curable ink ELS-170/ELS-175 *1 (C, M, Y, K, W, Cl) UV-curable ink LUS-210 *1 (C, M, Y, K, W, Cl)
	Capacity	1L bottle
Maximum print width		1,360mm (53.5")	1,610mm (63.4")
Media	Width	210 - 1,370mm (8.3 - 53.9")	210 - 1,620mm (8.3 - 63.8")
	Roll diameter	φ180 mm (7.1") or less
	Roll weight	25 kg (55.1lb) or less [45 kg (99.2 lb) or less with option *2]
	Core diameter	2 inch / 3 inch
Interface		Ethernet 1000BASE-T / USB2.0
Certifications		VCCI class A, FCC class A, ETL IEC 62368-1, CE Marking (EMC, Low voltage, Machinery directive, and RoHS), CB, Energy Star, RCM, KC
Power supply		Single phase AC100-120V±10% /11A or Single phase AC200-240V±10% /5.5A 50/60±1Hz
Power consumption		1,320W (Maximum), 550W (Average running), 4.5W or less (Standby)
Operational environment		Temperature: 20–30 °C (68–86 °F) Humidity: 35–65% Rh (Non condensing) Recommended temperature: 20–25 °C (68–77 °F) Dust level: General office level
Dimensions (W×D×H)		2,520 x 748 x 1,405 mm (99.2 x 29.4 x 55.3")	2,770 x 748 x 1,405 mm (109.1 x 29.4 x 55.3")
Weight		155 kg (341.7 lb)	160 kg (352.7 lb)

*1 ELS-175 and LUS-210 are an ink sold in specific countries and regions.
*2 With the OPT-J0502 Level Foot attached, supports media up to 45 kg (99.2 lb).

---

Ink set

---

ELS-170 ［C,M,Y,K,W,Cl］	C　M　Y　K
	C　M　Y　K　W　Cl
ELS-175 ［C,M,Y,K,W,Cl］	C　M　Y　K
	C　M　Y　K　W　Cl
LUS-210 ［C,M,Y,K,W,Cl］	C　M　Y　K
	C　M　Y　K　W
	C　M　Y　K　W　Cl

• Some of the samples in this website are artificial renderings.
• Specifications, design and dimensions stated in this website may be subject to change without notice (for technical improvements, etc).
• The corporate names and merchandise names written on this website are the trademark or registered trademark of the respective corporations.
• Inkjet printers print using extremely fine dots, so colors may very slightly vary after replacement of the printing heads. Also note that if using multiple printer units, colors could vary slightly from one unit to other unit due to slight individual differences.

Precautions for UV printing

Inks and substrates:

• Please note that properties and adhesion, weather resistance etc. of ink and substrates can vary. Therefore please test materials before printing.
• Some substrates require primer before printing. Please test materials beforehand or ask your sales representative.

Safety notice:
You are dealing with UV light sources that may harm your health. Please follow below guidelines strictly:

• Do not look directly into the UV light source nor place your hand, or expose your skin directly to the UV light source.
• Depending upon print mode, there might occur some VOC emittance from printed parts not yet cured and hardened.
• In addition, please read the instructions and guidelines of the manual carefully and follow those.

---