Specifications

UCJV150-160
Print head		On-demand piezo head
Print resolution		300dpi, 600dpi, 900dpi, 1200dpi
Droplet size		Min. 7pl, Max. 28pl
Head gap		3 degrees adjustment (2.0/2.5/3.0 mm) by manual
Print speed		4C Draft mode: 13.4 sqm/h 4C Standard mode: 8.0 sqm/h
Ink	Type	LED-UV ink: LUS-170
		LED-UV ink: LUS-175 *Only available in specific countries
	Color	4C (C, M, Y, K)
	Capacity	1L (Bottle supply)
Max. print width		1,610 mm (63.4 in)
Max. media width		1,620 mm (63.8 in)
Media thickness		1.0 mm or less
Media roll outer diameter		φ250 mm or less
Media roll weight		40 kg or less
Cut speed		Max. 300 mm/s (420 mm/s in 45 degrees direction)
Cut pressure		10-450 gf
Cutter	Types	Eccentric cutter, Blade for small character, Blade for reflective sheet, Blade for fluorescent sheet, Blade for PVC with low-pressure
Safety standard		VCCI Class A / FCC Class A / Compliant with UL 60950-1, ETL / CE Marking (EMC, Low voltage, Machinery directive) / RoHS / CB Report / REACH, ENERGY STAR® / RCM
Interface		USB2.0 / Ethernet 1000 BASE-T
Power supply		Single phase (AC100-120 / 200-240V±10%, 50/60Hz±1Hz)
Power consumption		AC100V: 1.44kW / AC200V: 1.92kW
Operational environment		Temperature: 20-30 degrees (68–86 °F) Humidity: 35–65% Rh (Non condensing)
Dimensions (W×D×H)		2,900 x 776 x 1,475 mm (114.2 x 30.6 x 58.1 in)
Weight		183 kg (403.4 lb)

Ink set

LUS-170 ［C,M,Y,K］	C　M　Y　K
LUS-175 ［C,M,Y,K］	C　M　Y　K

• Some of the screens and printing samples in this website are artificial renderings.
• Specifications are subject to change without notice.
• All trademarks or registered trademarks are the property of their respective owners.
• Inkjet printers print using extremely fine dots, thus colors may vary slightly following replacement of the printing heads. Also note that if using multiple printer units, colors may vary slightly among the units due to slight individual differences among the units.

---

---

Precautions for UV printing

Inks and substrates:

• Please note that properties and adhesion, weather resistance etc. of ink and substrates can vary. Therefore please test materials before printing.
• Some substrates require primer before printing. Please test materials beforehand or ask your sales representative.

Safety notice:
You are dealing with UV light sources that may harm your health. Please follow below guidelines strictly:

• Do not look directly into the UV light source nor place your hand, or expose your skin directly to the UV light source.
• Depending upon print mode, there might occur some VOC emittance from printed parts not yet cured and hardened.
• In addition, please read the instructions and guidelines of the manual carefully and follow those.

---