Specifications

TS5-1600AMF
Print Head		On-demand Piezo head (Array of 4 staggered print heads)
Maximum printing width		1,620mm (63.7")
Printing resolution		540, 720, 1,440 dpi
Printing mode (Scan x Feed)		720 x 540 dpi: Bi-directional & uni-directional
		540 x 900 dpi: Bi-directional & uni-directional
		540 or 720 x 720 dpi: Bi-directional & uni-directional
		540 or 720 x 1,080 dpi: Bi-directional & uni-directional
		720 x 1,440 dpi: Bi-directional & uni-directional
		1,440 x 1,440 dpi: Bi-directional & uni-directional
Ink	Kind	Sublimation ink: Sb53, Sb54
	Supply	Automatic change of double ink cartridges
	Capacity	4 color mode: 440 cc cartridge x 4/color, 1760 cc/color
		6 color mode: 440 cc cartridge x 2/color, 880 cc/color (M,BL:440 cc cartridge x 4/color, 1760 cc/color)
		2 liter ink pack can be used with MBIS
Media specification	Kind	Transfer papers
	Size	Maximum 1,630 mm (64.1") Minimum 297 mm (11.7")
	Thickness	less than 1.0 mm
	Roll weight	less than 38 kg(83lbs.)
	Printing surface	Face out
	Roll diameter	Outside: less than 250 mm(9.8") Inside: 76 mm(3")
Media cutting		Cutting in Y direction by cutter at the head
Media heater		3 way intelligent heater (PRE / PRINT / POST)
Media take-up device		Roll take-up device (standard), inside / outside selectable
Nozzle checking unit (NCU)		Laser system (Class 1 or below)
Print gap		1.5 mm to 7mm, step-less & user setting, (automatic detection of media thickness)
Interface		USB 2.0
Applicable standard		VCCI Class A, FCC Class A, UL 60950, CE Marking (EMC Directive, Low Voltage Directive) , CB Report, RoHS
Power source specification		AC 200V to 240V ±10%, 50/60 Hz ± 1Hz 15 A or below
Power consumption		3,600 VA or below
Operating environment		Usable temperature: 20°C to 35°C, Humidity: 35 % to 65%Rh, Not condensing
Outside dimension	(W) x (D) x (H)	3,120 x 850 x 1,540 mm (122.9" x 33.5" x 60.7")
Weight		less than 398kg (877lbs.)

• Some of the samples in this website are artificial renderings.
• Specifications, design and dimensions stated in this website may be subject to change without notice (for technical improvements, etc).
• The corporate names and merchandise names written on this website are the trademark or registered trademark of the respective corporations.
• Inkjet printers print using extremely fine dots, so colors may vary slightly after replacement of the print heads. Also note that if using multiple printer units, colors could vary slightly from one unit to the other due to slight individual differences.

---