Mimaki Driver Ver.5.9.6 (64bit)
| Type | Device Driver |
|---|---|
| Version | 5.9.6 |
| Release date | 10/17/2024 |
| Supported OS |
Windows 10 (64bit) Windows 11 |
| Supported Products | APC-130, CF3-1610M, CF3-1610R1, CF3-1610TF2, CF3-1631M, CF3-1631R1, CF3-1631TF2, CF22-1225RC-S, CF22-1225RT-S, CF22-1225T-S, CF22-1225TD-S, CF22-1225TF-S, CG-60AR, CG-60SRIII, CG-75FXII, CG-75FXII Plus, CG-100AR, CG-100SRIII, CG-130AR, CG-130FXII, CG-130FXII Plus, CG-130SRIII, CG-160FXII, CG-160FXII Plus, CJV150-75, CJV150-75BS, CJV150-107, CJV150-107BS, CJV150-130, CJV150-130BS, CJV150-160, CJV150-160BS, CJV200-75, CJV200-130, CJV200-160, CJV300-130, CJV300-130 Plus, CJV300-130BS, CJV300-160, CJV300-160 Plus, CJV300-160BS, CJV330-130, CJV330-160, JFX200-1213 EX, JFX200-2513, JFX200-2513 EX, JFX600-2513, JFX600-2531, JV100-160, JV150-130, JV150-130A, JV150-130BS, JV150-160, JV150-160A, JV150-160BS, JV300-130, JV300-130 Plus, JV300-130A, JV300-130BS, JV300-160, JV300-160 Plus, JV300-160A, JV300-160BS, JV300-190, JV330-130, JV330-160, TS100-1600, TS330-1600, TxF150-75, TxF300-75, UCJV300-75, UCJV300-107, UCJV300-130, UCJV300-160, UCJV330-130, UCJV330-160, UJF-3042 , UJF-3042FX, UJF-3042HG, UJF-3042MkII, UJF-3042MkII EX, UJF-3042MkII EX e, UJF-3042MkII e, UJF-6042, UJF-6042MkII, UJF-6042MkII e, UJF-7151 plus, UJF-7151 plusII, UJF-A3MkII, UJF-A3MkII EX, UJV100-160, UJV100-160Plus |
The following functions have been change
[Ver.5.9.5 -> Ver.5.9.6]
- The following models are available.
CJV200, JFX200-1213EX
- The following ink is available in JV330 / CJV330.
SS22 4Color / 6Color
- Job names can now be displayed in the PICT print history.
CJV200, JFX200-1213EX, JFX200-2513EX, UJV100Plus
[Ver.5.9.4 -> Ver.5.9.5]
- The following ink is available in JFX600-2513 / JFX600-2531.
LUS-120 6Color+WCl
LUS-150 6Color+WCl
- Job names can now be displayed in the PICT print history.
TxF150, TxF300, KebabHS(UJF-7151plusII, UJF-6042MkIIe, UJF-3042MkIIe)
[Ver.5.9.3 -> Ver.5.9.4]
- The following ink is available in UCJV330.
LUS-190 4Color / 4Color+WW
LUS-210 4Color / 4Color+WW
[Ver.5.9.2 -> Ver.5.9.3]
- The following models are available.
JFX600-2531
- Job names can now be displayed in the PICT print history.
JV330, CJV330, TS330, UCJV330
[Ver.5.9.0.5 -> Ver.5.9.2]
- The following ink is available in JFX600.
LUS-211 4Color / 4Color+ClClWW
- The following ink is available in UCJV330.
LUS-200 4Color / 4Color+WW
[Ver.5.9.0 -> Ver.5.9.0.5]
- The following defects have been improved.
- There are cases where white ink may be output too thick.
[Target printer] TxF150, TxF300
[Ver.5.8.2 -> Ver.5.9.0]
- The following defects have been improved.
- Communication error or printing stops occur at random times.
[Ver.5.8.0 -> Ver.5.8.2]
- The following ink is available in JFX200EX.
LUS-211 4Color+ClClWW
[Ver.5.7.3 -> Ver.5.8.0]
- The following models are available.
UCJV330, UJV100Plus
[Ver.5.7.2 -> Ver.5.7.3]
- The following ink is available in JFX600.
LUS-120 4Color+ClClWW, LUS-150 4Color+ClClWW
[Ver.5.7.1 -> Ver.5.7.2]
- The following models are available.
TxF300
[Ver.5.7.0 -> Ver.5.7.1]
- The following defects have been improved.
- Nozzle Recovery may not be enabled.
[Target printer] JV100, TS100, UJV100
[Ver.5.6.9 -> Ver.5.7.0]
- The following models are available.
JFX200EX
- The following defects have been improved.
- Manual MAPS may not be enabled.
[Target printer] JV300, CJV300, JV150, CJV150
[Ver.5.6.8 -> Ver.5.6.9]
- The following models are available.
TxF150
- The following defects have been improved.
- When using nozzle recovery on two layers, the panel may indicate that some nozzles are not recoverable even though nozzle recovery is possible.
[Target printer] JV330, CJV330
[Ver.5.6.7 -> Ver.5.6.8]
- The following defects have been improved.
- When setting [Step & Repeat] and print, printing speed slows down.
- When combining [RIP and Print] and [Tiling], the left edge of the second and subsequent tiles may be cut off by several centimeters.
- At MkII and MkIIe, discharged result has changed only specific data.
- JFX600 which mounted LUS-120 four colors are not displayed on the printer registration screen, and the printer cannot be registered.
- The layer output icon is not displayed on the thumbnail image during 2.5D printing/ composite printing.
- When combining the pre-print margin and [Step & Repeat], a portion of the printing area is output without printing.
[Ver.5.6.6 -> Ver.5.6.7]
- When using RasterLink7, primer recommended density has been supported at LH-100 and LUS-120 in JFX600
- The following defects have been improved.
When using RasterLink7, white ink at higher density printing cannot be executed in the combinations of printer and ink set described below.
[Target printer] UJF-6042MkIIe、UJF-3042MkII Ex e Ink set: CMYKClPrWW
[Ver.5.6.5 -> Ver.5.6.6]
- Improved operation during Ethernet communication.
[Ver.5.6.4 -> Ver.5.6.5]
- The following defects have been improved.
- When nozzle recovery is enabled, an error may occur during output.
[Target printer] JV300, JV150, CJV300, CJV150
[Ver.5.6.3 -> Ver.5.6.4]
- The following Colors are available in JFX600.
LUS-120 4Color / 6Color+SP / 4Color+SP
[Ver.5.6.2.2 -> Ver.5.6.3]
- The following defects have been improved.
- Cannot output from FineCoat when using DCF-605PU.
- When using combination of USB1.1 and Windows10/11, connection may not be possible depending on state of PC UCSI device (USB type-C).
[Target printer] USB1.1 device (CG-SR2, CG-FXII)
[Ver.5.6.2 -> Ver.5.6.2.2]
- The following defects have been improved.
- Fix the defect that may cause graininess when printed with Hi scan.
[Target printer] UJV100 4C+SP, UJV100 SP+4C, JV100 8C
[Ver.5.6.1 -> Ver.5.6.2]
- The following models are available.
JV330, CJV330, TS330
- LUS-200 ink is available in the following printers.
UJF-3042MkII, UJF-3042MkII EX, UJF-6042MkII
The following Colors are available in JFX600.
- LUS-150 4Color, LUS-150 6Color+SP
[Ver.5.6.0 -> Ver.5.6.1]
- LUS-210 ver2 ink is available in UJV100.
[Ver.5.5.3 -> Ver.5.6.0]
- LUS-200 ink is available in the following printers.
UJF-3042MkII e, UJF-3042MkII Ex e, UJF-6042MkII e
[Ver.5.5.2 -> Ver.5.5.3]
- The following defects have been improved.
For a job of color layer or white layer, illuminance does not change at printing even after illuminance of UV mode is changed and printing is executed.
[Ver.5.5.1 -> Ver.5.5.2]
- In JFX600, Glossy Print can be selected by UV mode of clear plate.
- In JFX600, following Special Color Over Print is available.
[Ver.5.5.0 -> Ver.5.5.1]
- Added support for silver ink on the UJF-7151plusII.
[Ver.5.4.2 -> Ver.5.5.0]
- The following models are available.
UJF-7151plusII, UJF-6042MkIIe, UJF-3042MkIIe, UJF-3042MkII EXe
[Ver.5.4.1 -> Ver.5.4.2]
- The following models are available.
UCJV300
[Ver.5.4.0 -> Ver.5.4.1]
- The following models are available.
UJF-7151, UJF-6042MkII, UJF-3042MkII, UJF-3042MkII EX, UJF-A3MkII, UJF-A3MkII EX
[Ver.5.3.3 -> Ver.5.4.0]
- The following models are available.
JV300, JV150, JV300Plus, CJV300, CJV150, CJV300Plus
[Ver.5.3.0 -> Ver.5.3.3]
- Image quality defects that occur under certain conditions have been improved.
[Ver.5.1.0 -> Ver.5.3.0]
- TS100 are available.
- Improved operation during Ethernet communication. (JV100, UJV100)
[Ver.5.1.0]
- JV100 is available.
Precautions for download
Be sure to read the following license agreement before downloading this software.
Software License Agreement
By installing this software, you agree to be bound by this agreement.
Article 1 Definition
- Software means the computer program supplied with this agreement.
- Related data means printed text data supplied with this software or printed data which we may supply subsequently.
- This software means the software, related data and the copy of this software which we supply to you.
Article 2 Limitations
- This software must not be copied against the provisions of this agreement.
- This software must not be changed or reverse engineered. Moreover, it must not be transferred, leased or sublicensed to the third party. The status of this agreement must not be transferred, either.
- This software must not be transferred, licensed or resold to the third party or transferred, licensed or purchased from it by rental or false rental activity.
- This software must not be transferred or licensed to the third party or purchased from it as secondhand goods.
Article 3 Limitation of Warranty
- It is not warranted that functions contained in this software suit the intended use of the customer.
- This software should be selected and introduced in the customer’s responsibility: any damage in installing this software in the computer’s hard disk and the plotter’s memory is not covered.
- We accept no responsibility for any results of the use of this software (including lost earnings or profits).
Article 4 Term of Validity
- The term of validity of this agreement starts when the customer installs this software.
- When the customer decides to stop using this software, this agreement is automatically terminated.
- This agreement is terminated immediately, without our notice, if the customer does not follow any clause of this agreement. If this agreement terminates, the whole of this software must be deleted.