Specification

Specifications

		CG-60AR	CG-100AR	CG-130AR
Acceptable sheet width		90 - 740 mm (3.5 - 29.1")	90 - 1,250 mm (3.5 - 49.2")	90 - 1,550 mm (3.5 - 61.0")
Effective cutting area *1		606 mm × 51 M (23.9" x 167.3')	1,070 mm × 51 M (42.1" x 167.3')	1,370 mm × 51 M (53.9" x 167.3')
Maximum speed		Cutting: 73 cm/s (28.7"/s), Moving at 45° direction: 103 cm/s (40.5"/s)
Adjustable speed range		1 - 10 cm/s (1 cm/s step adjustment): 0.4 - 3.9"/s (0.4"/s step adjustment) 10 - 73 cm/s (5 cm/s step adjustment): 4.0 - 28.7"/s (2.0"/s step adjustment)
Mechanical resolution		X direction: 2.5 μm, Y direction: 5 μm
Command resolution		25 μm, 10μm（MGL-IIc） / 100 μm, 50 μm（MGL-Ic1）
Repeatability *2		± 0.2 mm / 2 M
Effective Repeatability		586 mm × 2 M	1,050 mm × 2 M	1,350 mm × 2 M
Maximum pressure		550g
Range of down pressure	Cutter	10 - 20 g (2 g step), 20 - 100 g (5 g step), 100 - 550g (10g step)
	Pen	10 - 20 g (2 g step), 20 - 100 g (5 g step), 100 - 150g (10 g step)
	Creasing tool	10 - 20 g (2 g step), 20 - 100 g (5 g step), 100 - 550g (10g step)
Acceptable sheet 34		Vinyl sheet, Fluorescent type vinyl sheet, Reflective sheet, Rubber sheet and Cardboard (used in combination with an optional sheet table)
Acceptable tool *5		Eccentric cutter, Creasing tool, commercially available ball-point pen
Type of command		MGL-IIc / MGL-Ic1
Interface		USB, RS-232C, Ethernet
Receiver buffer size		About 27 MB as standard (17 MB when sorting is effective)
Operational environment		Temperature: 5 - 35 degC (41 - 95 degF), Humidity: 35 - 75 ％ Rh (Non-condensing)
Power supply		AC 100 V - 240 V 1A 50/60Hz
Power consumption		168W or less	228W or less
Dimensions（W×D×H）		1,010 × 355 × 355 mm (39.8 × 14.0 × 14.0") 1,010 × 580 × 1,160 mm 6 (39.8 × 22.8 × 45.7") 6	1,510 × 580 × 1,160 mm (59.4 × 22.8 × 45.7")	1,810 × 580 × 1,160 mm (71.3 × 22.8 × 45.7")
Weight		17kg (37.5 lb) 27kg (59.5 lb) *6	35kg (77.2 lb)	43kg (94.8 lb)
Stand		Options	Standard equipment

*1: Maximum sheet feeding length differs depending on the software.
*2: For detailed conditions of repetition accuracy, please refer to the instruction manual.
*3: For fluorescent and reflective sheets, use the blade dedicated to each material.
*4: Thick cardboard may reduce cut quality and precision.
*5: Use a commercially available ball-point pen with dia. 8-9 mm and without protrusion nor taper on the clamp position.
*6: When equipped with the optional stand.

Some of the screens and printing samples in this website are artificial renderings.
Specifications are subject to change without notice (for technical improvements, etc).
All trademarks or registered trademarks are the property of their respective owners.

CG-AR Series Catalog (698.91KB)