NC-5 [end of support]


Working surface 483mm x 305mm (19" x 12") *1
Maximum Material Size 520mm x Unlimited (20.5" x Unlimited)
SpeedModeling 0.5-80mm / sec (0.02"-3.1" / sec)
Moving 0.5-80mm / sec (0.02"-3.1" / sec)
Acceleration 0.3G
Mechanical Resolution 0.5μm
Z stroke 110mm (4.3")
Maximum Material Height 130mm (5.1")
SpeedModeling 0.5-80mm / sec (0.02"-3.1" / sec)
Moving 0.5-80mm / sec (0.02"-3.1" / sec)
Mechanical Resolution 0.5μm
Command MGL-IIC3, G *2
SpindleMaximum Rotation 15000rpm
Adjustable step Stepless adjustment 2,000-15,000 rpm
Positioning JOG Key or JOG Dial
Maximum Material Weight 10kg
Method of setting Endmill Collet Chuck
Programmable Steps 25μm or 10μm (MGL-IIC3), 1μm (G)
Maximum Shank Diameter of Endmill 10mm (0.4")
Receiver buffer size 1MB
Interface RS-232C
Table flatness accuracy 0.2mm
Distance accuracy ±0.15mm or ±0.05% of moving distance
Perpendicularity ±0.3mm / 300mm
Repeatability 0.05mm
Origin repetition accuracy ±0.1mm
Power consumption 1,400VA or less
Power requirement AC 100-120 / 220-240V 50 / 60Hz (Changed by Tap)
Operation enviorment 5-40ºC 30-75% (Rh) No Condensation
Dimensions (W x D x H) 725mm x 755mm x 660mm (Body)
285mm x 505mm x 162mm (Controller)
Weight 70kg (Body)
25kg (Controller)
  • *1 On the base table without setting any vise and table.
  • *2 (a) MGL-IIC3 is compatible with HP-GL command. (h) G for CNC commands.
  • The specifications are subject to change without prior notice.
  • All trade marks or registered trade marks are the property of respective owners.

NC-5 Catalog (735.73KB)


NC-5 Maximum engraving area: 483mm x 305 mm (19.0 x 12.0")

Application list

  • Carving
  • Mold

Related products

Return to Content