Specifications

UJF-605CII
Print head		Piezo-electric drop-on demand
Resolution		600dpi×600dpi, 1,200dpi×1,200dpi, 1,200dpi×2,400dpi
Ink		Exclusive UV curable ink (7 colors:Y,M,C,K,Lm,Lc,W) + Clear 440cc/cartridge for each color
Max. Printing Width	Width	600mm (23.6")
	Repeatability	500mm (19.68")
Distance Accuracy	Absolute accuracy	Whichever is the larger one of ±0.3mm or ±0.3% of designated distance
	Repeatability	Whichever the larger one of ±0.2mm or ±0.1% of designated distance
Perpendicularity		±0.5mm/500mm
Waste Ink Tank		Bottle type (2 liters) with sensor
Media Size	Size	700mm(27.5")×600mm(23.6")
	Thickness	50mm(1.96") or less
	weight	10kg (22 lbs) or less
Media Set Device		Flatbed with vacuum table
UV Device		Equipped with UV lamp
Interface		IEEE1394/IEEE1284
Applicable standard		VCCI class A, CE Marking, CB Report, UL, RoHS Direct
Power Requirement		Printer main unit・UV Device : Single-Phase 200V～240V
Power Consumption		4.0kVA or less (Main unit 0.5kVA, UV Device 1.8kVA, Heater 1kVA, blower 0.7 kVA)
Operational Environment	Temperature	15 to 30°C (59 to 86 °F)
	Humidity	35 to 65% Rh
	Accuracy guarantee temperature	18 to 25 °C(64 to 77 °F)
	Temperature gradient	±10 °C (50 °F)/h or less
	Dust	Equivalent to normal office level
Wight		420kg (926 lbs) or less (incl. UV power supply)
Outside Dimensions (W×D×H)		2,440mm(96")×1,570mm(61.9")×1,370mm(54") or less (incl. UV power supply)

*Exclusive RIP included as standard, compatible with EPS, PS, TIFF, JPEG and BMP file formats.
*Indicated values show the degree of mechanical precision.
At the time of shipment, adjustments are made to optimize visual quality.
*Inks would not be cured when printing speed is faster than that of draft mode.

---

Inks and substrates:

• Please note that properties and adhesion, weather resistance etc. of ink and substrates can vary. Therefore please test materials before printing.
• Some substrates require primer before printing. Please test materials beforehand or ask your sales representative.

---

Safety notice:
You are dealing with UV light sources that may harm your health. Please follow below guidelines strictly:

• Do not look directly into the UV light source nor place your hand, or expose your skin directly to the UV light source.
• Depending upon print mode, there might occur some VOC emittance from printed parts not yet cured and hardened.
• In addition, please read the instructions and guidelines of the manual carefully and follow those.

---