Specifications

Tx400-1800B
Printhead		On-Demand piezo heads in 3-layered staggered arrangement / 8 colors
Maximum print width		1,850 mm (72.8”)
Media transport system		Belt carrier system
Print media	Width	210~1,860 mm (8.2”~73.2”)
	Thickness	up to 7 mm (0.27”)
	Roll diameter	up to φ 400 mm (15.7”)
	Inside diameter	2 - 3 inch
	Weight	up to 44 kg (97.0 lb)
Ink	Type	Sublimation dye ink (Sb210), Reactive dye ink (Rc210), Textile Pigment ink (TP250)
	Number of colors	4 colors, 6 colors, 8 colors possible
	Capacity	16 slots per 2L ink containers in 8 colors mode: 2 containers/color (4L / color) possible in 6 colors mode: 2 containers/color (4L / color) possible in 4 colors mode: 4 containers/color (8L / color) possible
Operating environment	Temperature	15 °C~30 °C (59 °F~86 °F)
	Recommended temperature	20 °C~25 °C (68 °F~77 °F)
	Temperature variation	less than ± 10 °C (50 °F)
	Humidity	35~65% Rh (no condensation)
	Air	general office environment
Interface		USB2.0
Heather		Standard equipment
Power requirements	Printer	AC200 - 240 V ± 10 % 50/60 Hz ± 1 Hz, 7.5 A
	Conveying belt section	3 φ Y380~420 V ±10% 50/60 Hz ±1Hz,36 A
Dimensions (W) x (D) x (H) including ink supply unit		4,300×2,930×1,650 mm (169.2”×115.3”×64.9”)
Installation space (W) x (D)		6,300×5,000 mm or more (248.0”×196.8” or more)
Carrying frontage		3,000 mm or more (118.1” or more)
Weight		2,300 kg (5,070.5 lb)

• Some of the samples in this website are artificial renderings.
• Specifications, design and dimensions stated in this website may be subject to change without notice (for technical improvements, etc).
• The corporate names and merchandise names written on this website are the trademark or registered trademark of the respective corporations.
• Inkjet printers print using extremely fine dots, so colors may very slightly vary after replacement of the printing heads. Also note that if using multiple printer units, colors could vary slightly from one unit to other unit due to slight individual differences.

---