Specifications

CFL-605RT
Type		Flatbed cutting plotter
Driving method		X/Y/Z/Θ 4 axes: DC servo motor
Material holding method		Air suctioning by a vacuum unit
Maximum media		630 mm x 530 mm
Cutting area		610 mm × 510 mm
Maximum cutting speed		XY: 423 mm/s (45° angle direction) Z: 30 mm/s
Maximum downforce pressure		Eccentric cutter: 1,000 g / Tangential cutter and Creasing roller: 1,500 g
Maximum media thickness		Reciprocating cutter: 10 mm / Tangential cutter: 2 mm *1
Maximum media weight		10 kg (This is not one-point-load strength)
Static accuracy	Repeatability	0.2 mm or lower (Material shrinkage is ignored)
	Distance accuracy	Moving distance × ±0.2% or lower or ±0.1 mm or lower Larger value is applied
	Original repetition accuracy	0.1 mm or lower
A unit		Attachable tools: Eccentric cutter, Pen
B unit		Attachable tools: Reciprocating/Tangential cutter, Creasing roller
Command		MGL-IIc3
Certifications		VCCI class A, FCC class A, ETL UL 60950-1 CE Marking (Machinery directive, RoHS), CB, REACH
Interface		USB 2.0 (High Speed), RS-232C, Ethernet
Noise level		70 db or lower (The maximum level is generated while a reciprocating cutter or a vacuum blower is used.)
Operational environment		Temperature: 5 °C–35 °C, 35%–75% RH (Non-condensing) Guaranteed humidity range for an accurate operation: 12 °C–25 °C, 45%–65% RH (Non-condensing)
Power specification		Single phase AC 100–120 V/200–240 V, 50/60 Hz
Power consumption		500 W or lower
Dimensions (W × D × H)		1,320 mm × 1,045 mm × 1,100 mm
Weight		109 kg or lower (Blower, 23 kg, included)

Please note:
*1: An applicable range of cutting thickness may slightly vary depending on materials.

Specifications are subject to change without notice (for technical improvements, etc).
All trademarks or registered trademarks are the property of their respective owners.

CFL-605RT Catalog (1.07MB)