Specifications

UJF-6042MkII e
Printhead		On-demand piezo printhead (4 printheads arranged in a staggered line)
Print resolution		Maximum: 1200 x 1200 dpi
Maximum printable area		Width：610mm Length：420mm (A2 size)
Ink	Type/Color	LH-100 (C, M, Y, K, Lc, Lm, W, Cl) LUS-120 (C, M, Y, K, Lc, Lm, W, Cl) LUS-150 (C, M, Y, K, W) PR-200 (Primer)
	Packaging	LH-100, LUS-120, PR-200: 250 ml bottle / 1 L bottle LUS-150: 1 L bottle
Media	Thickness	153 mm (6 in) or less
	Weight	8 kg (17.7 lb) or less
Certifications		VCCI class A / FCC class A / ETL IEC 62368-1 / CE Marking (EMC, Low voltage, Machinery directive, and RoHS) / CB / REACH / Energy Star / EAC / RCM
Interface		Ethernet / USB2.0
Noise level		Standby mode: 55dB or less (FAST-A, measured1 m away from the source) Continuous operation: 65 dB or less Discontinuous operation: 70 dB or less
Power supply		Single-phase AC100-240V, ±10%, 50/60Hz ±1Hz
Power consumption		1,000W or less
Operational environment	Temperature	20 - 30 degC (68 - 86 degF)
	Humidity	35 - 65％Rh (Non condensing)
	Recomended Temperature	20 - 25 degC (68 - 77 degF)
	Temperature change	±10 degC (±50 degF) /h or less
	Dust level	Equivalent to a general office floor level
RIP software		RasterLink7 (Bundled)
Dimensions (W × D × H) *1		1,665 mm × 1,290 mm × 856 mm (65.6 in × 50.8 in × 33.7 in)
Weight		150 kg (330.7 lb)

*1: Heights of ink bottles are not included.
- Inks would not be cured when printing speed is faster than that of draft mode.

• Some of the screens and printing samples in this website are artificial renderings.
• Specifications are subject to change without notice.
• All trademarks or registered trademarks are the property of their respective owners.
• Inkjet printers print using extremely fine dots, thus colors may vary slightly following replacement of the printing heads. Also note that if using multiple printer units, colors may vary slightly among the units due to slight individual differences among the units.

Precautions for UV printing

Inks and substrates:

• Please note that properties and adhesion, weather resistance etc. of ink and substrates can vary. Therefore please test materials before printing.
• Some substrates require primer before printing. Please test materials beforehand or ask your sales representative.

Safety notice:
You are dealing with UV light sources that may harm your health. Please follow below guidelines strictly:

• Do not look directly into the UV light source nor place your hand, or expose your skin directly to the UV light source.
• Depending upon print mode, there might occur some VOC emittance from printed parts not yet cured and hardened.
• In addition, please read the instructions and guidelines of the manual carefully and follow those.

---